Samsung SMT-G3020
From TechInfoDepot
Jump to navigationJump to searchdsl modem | |
3rd Party Firmware | |
---|---|
dd-wrt |
Status Unknown |
OpenWrt |
Not Supported |
Tomato any flavor |
Incompatible |
Platform | |
Brand • Model • Rev |
Samsung SMT-G3020 |
Type |
dsl modem |
CPU1 ![]() |
Infineon (Lantiq) PSB 50505 |
CPU1 Type |
MIPS 4KEc |
CPU1 Speed |
235 MHz |
Flash1 Chip |
Brand? Model? |
Flash1 Size |
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> |
RAM1 Size |
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> |
RAM1 Chip |
Brand? Model? |
ETH chip1 |
Infineon (Lantiq) PSB 50505 |
Switch |
Infineon ADM6996I |
Ethernet Port Count |
4-100MbE-LAN |
Wired Standard |
IEEE 802.3i/3u |
| |
Stock bootloader |
U-Boot |
Expansion IF types |
USB 2.0 |
USB ports |
1 |
USB Hub Compatible |
Untested |
Serial Port (UART) |
yes |
JTAG Port |
yes |
Flags: ADSL2+ | |
|
For a list of all currently documented Infineon (Lantiq) chipsets with specifications, see Infineon.
For a list of all currently documented Infineon (Lantiq) chipsets with specifications, see Infineon.
For a list of all currently documented Samsung device with specifications, see Samsung.
Flashing
![]() | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
![]() | This device is NO LONGER SUPPORTED OR POSSIBLE for future use with OpenWrt. |
On the OpenWrt ToH (techdata entry)
On the OpenWrt Wiki
OpenWrt Target: lantiq
OpenWrt Subtarget: ase
OpenWrt Package architecture: mips_mips32
Support started version: Never supported
Current supported version: Never supported
Unsupported Functions:
Never supported
On the OpenWrt Wiki
OpenWrt Target: lantiq
OpenWrt Subtarget: ase
OpenWrt Package architecture: mips_mips32
Support started version: Never supported
Current supported version: Never supported
Unsupported Functions:
Never supported
Please insert instructions here