Samsung Ubigate iBG1000
| Ubigate iBG1000 T1/E1 Gateway/Router/Modem/VPN CSU/DSU | |
|
| |
| WikiDevi.wi-cat.ru | Samsung Ubigate iBG1000 |
|---|---|
| 3rd Party Firmware | |
| dd-wrt | Status Unknown |
| OpenWrt | Status Unknown |
| Tomato any flavor | Incompatible |
| Platform | |
| Brand • Model • Rev | Samsung Ubigate iBG1000 |
| Model Part Number | PCS01E |
| US ID | A3LDENANiBG1000 |
| Type | T1 router, Router Firewall, VoIP gateway |
| CPU1 | Freescale (NXP) MPC8347E |
| CPU1 Type | Power QUICC |
| CPU1 Speed | not specified |
| Flash1 Chip | Spansion S29AL016D70TFI02 |
| Flash1 Size | 2 MiB 2,097,152 B <br />16,384 Kib <br />2,048 KiB <br />16 Mib <br />0.00195 GiB <br /> |
| Flash2 Chip | Samsung MM8GF01GWACA-NA |
| Flash2 Size | 1 GiB 1,024 MiB <br />1,073,741,824 B <br />8,388,608 Kib <br />1,048,576 KiB <br />8,192 Mib <br /> |
| RAM1 Size | 512 MiB 536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> |
| RAM1 Chip | Samsung K4T511630G-HCE6 x 8 |
| ETH chip1 | Freescale (NXP) MPC8347E |
| ETH chip2 | Kendin KSZ8721B |
| ETH chip3 | Kendin KSZ8721B |
| Ethernet Port Count | 2-100MbE-LAN |
| Wired Standard | IEEE 802.3i/3u |
| Expansion IF types | SD Card |
| SD/MMC Slots | 1 |
| Power | 12 VDC, 2 A |
| Connector type | barrel |
| Serial Port (UART) | yes, console |
|
| |
|
Additional chips | |
| Other | |
|
Default login user: samsung | |
| Manuf/OEM/ODM | Samsung |
| Retail | |
| (Est.) release date | June 2008 |
| Country of manuf | Korea |
For a list of all currently documented Freescale (NXP) SoC's with specifications, see Freescale.
For a list of all currently documented Micrel (Kendin) chipsets with specifications, see Micrel.
For a list of all currently documented Samsung devices with specifications, see Samsung.
Overview
"CBU-4 EQ41-00084A PCS01E" is etched onto the bottom layer of the board.
- Configuration would seem to be via the console port only.
- The RAM on this device is on-board a removable SODIMM Samsung M470T6554GZ3-CE6, 512MB 2Rx16, PC2-5300S
- The device's firmware is on-board a removable 1GB SD Card Samsung MM8GF01GWACA-NA
PSU
The power supply included with the unit (at least in the US...) would seem to be a BridgePower JPW129KA1200N01 (100-240VAC 50/60Hz, 1A -> 12VDC/2A) The device has a barrel w/ a reverse gender core (center pin on the adapter)
- Samsung
- Embedded system/T1 router
- Embedded system/Router Firewall
- Embedded system/VoIP gateway
- Embedded System Freescale (NXP)
- Embedded System MPC8347E
- Freescale (NXP)
- Embedded System Power
- Embedded System QUICC
- Embedded System KSZ8721B
- Embedded System Kendin
- Kendin
- Manuf Samsung
- Wired Embedded System
- Embedded System
- English Documentation