Seagate GoFlex Home

multiple revisions of this device, use caution

FreeAgent GoFlex Home
Homepage	Product page
WikiDevi.wi-cat.ru	Seagate GoFlex Home
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Supported
Tomato any flavor	Incompatible
Gargoyle	Status Unknown
Platform
Brand • Model • Rev	Seagate GoFlex Home
Model Part Number	STAM1000100
Type	NAS
CPU1	Marvell 88F6281
CPU1 Type	ARMv5
CPU1 Speed	1.2 GHz
Flash1 Chip	Micron 29F2G08AAD
Flash1 Size	256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> (NAND)
RAM1 Size	128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (DDR2 800)
RAM1 Chip	Nanya NT5TU64M16DG-AC
ETH chip1	Marvell 88F6281
ETH chip2	Marvell 88E1116R
Ethernet Port Count	1-1GbE-LAN
Wired Standard	IEEE 802.3i/3u/3ab
Ethernet OUI: 00:10:75 (12 E, 2 W)
Stock bootloader	U-Boot 1.1.4 Cloud Engines
Stock FW OS	Linux 2.6.22.18 Axentra HipServ OS
Expansion IF types	SATA, USB 2.0
USB ports	1
SATA Ports	1
USB Hub Compatible	Untested
Power	12 VDC, 2 A
Connector type	barrel 5.5 mm (OD) 2.1 mm (ID) 9.5 mm (LEN)
Serial Port (UART)	yes, 3.3V TTL, 10-pin header, populated, (115200,8N,1,), J1
Flags: RTC w/ battery, heatsink
Additional chips 1.5/2A, 1MHz Dual Step-down Regulator;Marvell;88PG8227;;2; Field Programmable DSP Switcher;Marvell;88PG847B;;1; 16V/4A 500kHz Synchronous Step-Down Converter;MPS;MP8708EN;;1;
Other
Default IP address: acquired via DHCP the IP acquired via DHCP is used by 211 additional devices of which 6 are Seagate devices Default login user: root Default login password: stxadmin root:stxadmin credentials used by 2 additional devices of which 2 are Seagate devices
3rd Party Firmware Support	OpenWrt • (List | Dev | DLs)
Retail
Availability	End of Life
(Est.) release date	October 2010
ASIN	B003SU4BXQ
Country of manuf	China
CPU1 brand FLA1 RAM1 Seagate GoFlex Home Marvell 256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> 128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> Seagate GoFlex Net Marvell 256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> 128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> Seagate GoFlex Satellite (500GB) Texas Instruments 128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> 128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br />

For a list of all currently documented Marvell chipsets with specifications, see Marvell.

For a list of all currently documented Seagate device with specifications, see Seagate.

Overview

"EHDUL4 7D28UL44001R1" and "REV.01" are silkscreened on the board.

Specifications

• Processor: Marvell Kirkwood @1.2GHz

Architecture: ARMv5te

• RAM: 128MB (DDR2-800)
• Flash: 256MB (NAND)
• USB: 1x USB 2.0
• SATA: 1x SATA
• LAN: 1x GbE (RJ45)

The GoFlex Home is a device based on the Marvell Sheeva plug computer platform,

and is the successor to the DockStar and sister device to the GoFlex Net.

Unlike the GoFlex Net, the GoFlex Home comes with a single SATA connection

used by either a 1, 2, or 3 TB hard drive that comes with the device.

Links of Interest

Run Linux on the GoFlex Home

Flashing

Flashing OpenWrt

On the OpenWrt ToH (techdata entry)
On the OpenWrt Wiki
OpenWrt Target: kirkwood
OpenWrt Subtarget: generic
OpenWrt Package architecture: arm_xscale
Support started version: 15.05
Current supported version: 23.05.5

Please insert instructions here

Pictures

Retail Images

• 
• 

User Images

• 
•