SeeedStudio NPi i.MX6ULL Dev Board (eMMC)
Single Board Computer | |
Homepage | Product page |
---|---|
3rd Party Firmware | |
dd-wrt | Status Unknown |
OpenWrt | Status Unknown |
Tomato any flavor | Incompatible |
Gargoyle | Status Unknown |
Platform | |
Brand • Model • Rev | SeeedStudio NPi i.MX6ULL Dev Board eMMC |
Type | single-board computer |
CPU1 ![]() | Freescale (NXP) i.MX6ULL |
CPU1 Type | ARM Cortex-A7 |
CPU1 Speed | 800 MHz |
Flash1 Chip | Samsung KLM8G1GETF-B041 |
Flash1 Size | 8 GiB 8,192 MiB <br />8,589,934,592 B <br />67,108,864 Kib <br />8,388,608 KiB <br />65,536 Mib <br /> |
RAM1 Size | 512 MiB536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> |
RAM1 Chip | Micron MT41K256M16TW-107 IT:P |
ETH chip1 | Freescale (NXP) i.MX6ULL |
ETH chip2 | Microchip KSZ8081RNB |
ETH chip3 | Microchip KSZ8081RNB |
Ethernet Port Count | 2-100MbE-LAN |
Wired Standard | IEEE 802.3i/3u |
| |
Stock bootloader | U-Boot 2019.04 |
Stock FW OS | Linux 4.19.71 Debian 10 |
Expansion IF types | USB 2.0, MicroSD Card slot |
USB ports | 2 |
SD/MMC Slots | 1 |
USB Hub Compatible | Untested |
Power | 5 VDC, ? A |
Connector type |
barrel 5.5 mm (OD) 2.5 mm (ID) 9.5 mm (LEN) |
Serial Port (UART) | yes, 4-pin header, populated, 3.3V TTL, (115200 8N1), |
Flags: | |
Additional chips | |
Other | |
Default IP address: acquired via DHCP | |
3rd Party Firmware Support | Ubuntu 20.04 |
Retail | |
(Est.) release date | November 2019 |
(Est.) initial retail price (in USD): | $44 |
Country of manuf | China |
For a list of all currently documented Freescale (NXP) SoC's with specifications, see Freescale.
For a list of all currently documented Microchip (SMSC) chipsets with specifications, see Microchip.
For a list of all currently documented SeeedStudio devices with specifications, see SeeedStudio.
Overview
Hardware specification
- CPU: NXP MCIMX6Y2CVM08AB Single-core Cortex-A7 @800MHz
- Memory: 512MB (SDRAM) DDR3L
- Onboard Storage: 8 GiB eMMC, TF card (max. 128GB) / MMC card slot
- Network: 2x FE
- USB: 1x USB 2.0, 1 Type-C Device
- GPIO: 1x 40-pin Headers,
- Power Source: DC Jack 5V