Senao EAP7660D
From TechInfoDepot
Jump to navigationJump to searchbg (G54) | |
---|---|
access point | |
3rd Party Firmware | |
dd-wrt |
Status Unknown |
OpenWrt | |
Tomato any flavor |
Incompatible |
Gargoyle |
Status Unknown |
Platform | |
Brand • Model • Rev |
Senao EAP7660D |
FCC ID |
none specified |
Type |
access point |
CPU1 ![]() | |
CPU1 Type |
MIPS 24K |
CPU1 Speed |
680 MHz 32-bit |
Flash1 Chip |
Brand? Model? |
Flash1 Size |
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> |
RAM1 Size |
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> |
RAM1 Chip |
Brand? Model? |
ETH chip1 |
Brand? Model? |
802dot11 OUI: none specified | |
Stock bootloader |
RedBoot |
Expansion IF types |
none specified |
Serial Port (UART) |
yes, (115200 8N1) |
Other | |
| |
3rd Party Firmware Support | |
Radio 1 | |
Chip1 |
Brand? Model? |
Wireless interface OUI |
none specified |
Antenna Connector Type |
none specified |
Wireless Standard |
IEEE 802.11b/g |
802.11g |
up to 54 Mbps |
802.11b |
up to 11 Mbps |
WiFi Operating Frequency |
2.4 GHz |
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented Senao device with specifications, see Senao.
- • 54 Mbps - 2.4GHz 802.11g = G54 class
Flashing
![]() | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
![]() | This device is NO LONGER SUPPORTED OR POSSIBLE for future use with OpenWrt. |
On the OpenWrt ToH (techdata entry)
OpenWrt Target: ar71xx
OpenWrt Subtarget: generic
OpenWrt Package architecture: mips_24kc
Support started version: 17.01.0
Current supported version: EOL
Last Supported Version: 19.07.10
OpenWrt Target: ar71xx
OpenWrt Subtarget: generic
OpenWrt Package architecture: mips_24kc
Support started version: 17.01.0
Current supported version: EOL
Last Supported Version: 19.07.10
Please insert instructions here