Senao SL-2000

From TechInfoDepot
Jump to navigationJump to search
legacy (DSSS) (DSSS)
access point
WikiDevi.wi-cat.ru Senao SL-2000
3rd Party Firmware
dd-wrt Status Unknown
OpenWrt Status Unknown
Tomato any flavor Incompatible
Platform
BrandModelRev Senao SL-2000
FCC ID NI3-SL-2000
Type access point
CPU1 checkY AMD ElanSC400
CPU1 Type x86-64 Am486
CPU1 Speed not specified 32-bit
Flash1 Chip Brand? Model?
Flash1 Size ? MiB
RAM1 Size ? MiB
RAM1 Chip Samsung Model? x 2
ETH chip1 Realtek RTL8019AS
Ethernet Port Count 1-10MbE-LAN
Wired Standard IEEE 802.3i

802dot11 OUI: 00:02:6F (28 E, 62 W)

Expansion IF types PCMCIA (16-bit)
PCMCIA slots 1
Power 6 VDC, 1 A
Connector type barrel
Serial Port (UART) DE-9

Flags:
partial schematics, block diagram

Other

Default SSID: IEEE802.11
Default IP address: 192.72.10.125
Default login user: default
Default login password: default

Retail
FCC approval date 04 June 2001
Radio 1
Radio1 module Senao SL-2000CD
Radio1 module IF PCMCIA (16-bit)
Chip1 AMD Am79C930
Chip2 Harris HSP3824
Chip3 Harris HFA3726
Wireless interface OUI 00:02:6F
Antenna Connector Type unknown
Wireless Standard legacy (DSSS)

For a list of all currently documented AMD chipsets with specifications, see AMD.
For a list of all currently documented Harris chipsets with specifications, see Harris.
For a list of all currently documented Realtek chipsets with specifications, see Realtek.

For a list of all currently documented Senao devices with specifications, see Senao.

Overview

The FCC manual for the SL-2000 states...

The the default settings are...
Default Supervisor's and Telnet password: default
Default Web UI credentials: default:default
Default IP address: 192.72.10.125
The weight of the unit is 920g.
The dimensions of the unit are 221mm x 166mm x 33mm
The device accepts 6VDC power (1A specced) and consumes 6W

The FCC manual for the SL-2000CD states...

Normal Output Power: 15dBm
Receive Sensitivity (FER=0.08): -88dBm