Database changes have finished applying - please report any issues you're (still) seeing to support@shoutwiki.com.

SerComm AP221AI

From TechInfoDepot
Jump to navigationJump to search
abgn (AN600)
access point
WikiDevi.wi-cat.ru SerComm AP221AI
3rd Party Firmware
dd-wrt Status Unknown
OpenWrt Status Unknown
Tomato any flavor Incompatible
Platform
BrandModelRev SerComm AP221AI
FCC ID P27AP221AI
Type access point
CPU1 checkY Atheros AR9344
CPU1 Type MIPS 74Kc
CPU1 Speed 560 MHz 32-bit
Flash1 Chip Macronix Model?
Flash1 Size ? MiB
RAM1 Size ? MiB
RAM1 Chip Samsung Model? x 2
ETH chip1 Atheros AR9344
ETH chip2 Atheros Model?
Ethernet Port Count 1-1GbE-LAN
Wired Standard IEEE 802.3i/3u/3ab

802dot11 OUI: none specified

Expansion IF types none specified
Power ? VDC, ? A
Connector type barrel
Serial Port (UART) yes, 3.3V TTL, internal, 4-pin header, 3.3V TTL, console port (RJ45)
Other

Default IP address: 192.168.0.228
the IP 192.168.0.228 is used by 3 additional devices
of which 1 are SerComm devices
Default login user: admin
Default login password: password
admin:password credentials used by 426 additional devices
of which 8 are SerComm devices

Manuf/OEM/ODM SerComm
Retail
FCC approval date 11 March 2014
Country of manuf China
Radio 1
Chip1 Atheros AR9344
Wireless interface OUI none specified
Antenna Connector Type U.FL, RP-SMA
MIMO status 2x2:2
Wireless Standard IEEE 802.11b/g/n
802.11n up to 300 Mbps
802.11g up to 54 Mbps
802.11b up to 11 Mbps
WiFi Operating Frequency 2.4 GHz
Radio 2
Chip1 Atheros AR9382
Wireless interface OUI none specified
Antenna Connector Type U.FL, RP-SMA
MIMO status 2x2:2
Wireless Standard IEEE 802.11a/n
802.11n up to 300 Mbps
802.11a up to 54 Mbps
WiFi Operating Frequency 5 GHz

For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.

For a list of all currently documented SerComm devices with specifications, see SerComm.

300 Mbps - 2SS 5GHz 802.11n (40MHz chan.),
300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = AN600 class

Overview

"490ADS00E-1.6MM" is silkscreened on the board in the FCC photos.

Default settings are per the FCC manual..