SerComm IP1006RRv2
From TechInfoDepot
Jump to navigationJump to search
bgn (N300) | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
wireless router | |||||||||||||
3rd Party Firmware | |||||||||||||
dd-wrt | Incompatible | ||||||||||||
OpenWrt | Was Supported | ||||||||||||
Tomato any flavor | Incompatible | ||||||||||||
Gargoyle | Status Unknown | ||||||||||||
Platform | |||||||||||||
Brand • Model • Rev | SerComm IP1006RR v2 | ||||||||||||
FCC ID | none specified | ||||||||||||
Type | wireless router | ||||||||||||
CPU1 ![]() | Ralink RT3052 | ||||||||||||
CPU1 Type | MIPS 24KEc | ||||||||||||
CPU1 Speed | 384 MHz | ||||||||||||
Flash1 Chip | Brand? Model? | ||||||||||||
Flash1 Size | 4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> | ||||||||||||
RAM1 Size | 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> | ||||||||||||
RAM1 Chip | Brand? Model? | ||||||||||||
ETH chip1 | Ralink RT3052 | ||||||||||||
Switch | Ralink RT3052 | ||||||||||||
Ethernet Port Count |
1-100MbE-WAN 4-100MbE-LAN | ||||||||||||
Wired Standard | IEEE 802.3i/3u | ||||||||||||
802dot11 OUI: none specified | |||||||||||||
Stock bootloader | U-Boot | ||||||||||||
Expansion IF types | none specified | ||||||||||||
Serial Port (UART) | yes | ||||||||||||
JTAG Port | no | ||||||||||||
| |||||||||||||
| |||||||||||||
Other | |||||||||||||
| |||||||||||||
3rd Party Firmware Support |
OpenWrt (Was) | ||||||||||||
Retail | |||||||||||||
Availability | End of Life | ||||||||||||
Radio 1 | |||||||||||||
Chip1 | Ralink RT3052 | ||||||||||||
Wireless interface OUI | none specified | ||||||||||||
Antenna Connector Type | none specified | ||||||||||||
MIMO status | 2x2:2 | ||||||||||||
Wireless Standard | IEEE 802.11b/g/n | ||||||||||||
802.11n | up to 300 Mbps | ||||||||||||
802.11g | up to 54 Mbps | ||||||||||||
802.11b | up to 11 Mbps | ||||||||||||
WiFi Operating Frequency | 2.4 GHz | ||||||||||||
|
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
For a list of all currently documented SerComm devices with specifications, see SerComm.
- • 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class
Flashing
![]() | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
![]() | This device is NO LONGER SUPPORTED OR POSSIBLE for future use with OpenWrt. |
On the OpenWrt ToH (techdata entry)
On the OpenWrt Wiki
OpenWrt Target: ramips
OpenWrt Subtarget: rt305x
OpenWrt Package architecture: mipsel_24kc
Support started version: 12.09
Current supported version: EOL
Last Supported Version: 12.09
On the OpenWrt Wiki
OpenWrt Target: ramips
OpenWrt Subtarget: rt305x
OpenWrt Package architecture: mipsel_24kc
Support started version: 12.09
Current supported version: EOL
Last Supported Version: 12.09
Please insert instructions here