SerComm IP706ST

From TechInfoDepot
Jump to navigationJump to search
b (B11)
wireless router
3rd Party Firmware
dd-wrt Incompatible
OpenWrt Incompatible
Tomato any flavor Incompatible
Platform
BrandModelRev SerComm IP706ST
FCC ID P270K30
Type wireless router
CPU1 Question? Texas Instruments TNETW5305
CPU1 Type ARM7
Flash1 Chip Brand? Model?
Flash1 Size ? MiB
RAM1 Size ? MiB
RAM1 Chip ICSI Model? x 2
ETH chip1 Texas Instruments TNETW5305
Switch ADMtek Model?
Ethernet Port Count 1-WAN
4-100MbE-LAN
Wired Standard IEEE 802.3i/3u

802dot11 OUI: none specified

Expansion IF types none specified
Power 12 VDC, 0.8 A
Connector type barrel
Other

Default IP address: 192.168.0.1
the IP 192.168.0.1 is used by 819 additional devices
of which 13 are SerComm devices

Manuf/OEM/ODM SerComm
Retail
Availability OEM
FCC approval date 03 April 2003
Country of manuf Taiwan
Radio 1
Chip1 Texas Instruments ACX100
Wireless interface OUI none specified
Antenna Connector Type none specified
Wireless Standard IEEE 802.11b
802.11b up to 11 Mbps
WiFi Operating Frequency 2.4 GHz

For a list of all currently documented ADMtek chipsets with specifications, see ADMtek.
For a list of all currently documented Texas Instruments (TI) chipsets with specifications, see Texas Instruments.

For a list of all currently documented SerComm devices with specifications, see SerComm.

11 Mbps - 2.4GHz 802.11b = B11 class

Overview

The FCC test report specifies the CPU as the TNETW5305 (ARM7) and the Flash and RAM size as 1MB and 4MB respectively (with Can Expand noted after the values). It also specifies the Switch chip as a Atan 8995L / AT8985P or Marvell 88E6052.. but the FCC image shows the device with an ADMtek Switch.

The default IP for this device is from the FCC manual.

The default SSID may be default.

Links of Interest

Firmware v1109 (via archive.org)