SerComm PS801Hv1
From TechInfoDepot
Jump to navigationJump to searchbg (G54) | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
print server | |||||||||||||
3rd Party Firmware | |||||||||||||
dd-wrt | |||||||||||||
OpenWrt |
Incompatible | ||||||||||||
Tomato any flavor |
Incompatible | ||||||||||||
Platform | |||||||||||||
Brand • Model • Rev |
SerComm PS801H v1 | ||||||||||||
FCC ID | |||||||||||||
IC ID | |||||||||||||
Type |
print server | ||||||||||||
CPU1 |
Marvell 88W8510 | ||||||||||||
CPU1 Type |
ARMv9 | ||||||||||||
CPU1 Speed |
160 MHz | ||||||||||||
Flash1 Chip |
Macronix MX29LV800TTC-70 | ||||||||||||
Flash1 Size |
1 MiB1,048,576 B <br />8,192 Kib <br />1,024 KiB <br />8 Mib <br />9.765625e-4 GiB <br /> | ||||||||||||
RAM1 Size |
4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> | ||||||||||||
RAM1 Chip |
EtronTech EM636165TS-6 x 2 | ||||||||||||
ETH chip1 |
Marvell 88W8510 | ||||||||||||
Ethernet Port Count |
1-100MbE-LAN | ||||||||||||
Wired Standard |
IEEE 802.3i/3u | ||||||||||||
802dot11 OUI: none specified | |||||||||||||
Expansion IF types |
USB 2.0 | ||||||||||||
USB ports |
1 | ||||||||||||
USB Hub Compatible |
Untested | ||||||||||||
Power |
5 VDC, 2 A | ||||||||||||
Connector type |
barrel | ||||||||||||
Other | |||||||||||||
Default IP address: 192.168.0.100 | |||||||||||||
Manuf/OEM/ODM |
Yes | ||||||||||||
Retail | |||||||||||||
FCC approval date | 15 July 2004 | ||||||||||||
Country of manuf | Taiwan | ||||||||||||
Radio 1 | |||||||||||||
Chip1 |
Marvell 88W8510 | ||||||||||||
Chip2 |
Marvell Model? | ||||||||||||
Wireless interface OUI |
none specified | ||||||||||||
Antenna Connector Type |
none specified | ||||||||||||
Wireless Standard |
IEEE 802.11b/g | ||||||||||||
802.11g |
up to 54 Mbps | ||||||||||||
802.11b |
up to 11 Mbps | ||||||||||||
WiFi Operating Frequency |
2.4 GHz | ||||||||||||
| |||||||||||||
|
For a list of all currently documented Marvell chipsets with specifications, see Marvell.
For a list of all currently documented SerComm device with specifications, see SerComm.
- • 54 Mbps - 2.4GHz 802.11g = G54 class
Overview
The FCC internal photos are perma-confidential for some reason.. but the FCC test report does have some.
- "4900NT0CB" or something is silkscreened on the board.
This device is using an NEC USB 2.0 controller.
The default IP address is from the FCC manual.