SerComm SHG1500 VS2
From TechInfoDepot
				(Redirected from Sercomm SHG1500 VS2)
				
				Jump to navigationJump to search
				
				| abgn (N) | |
|---|---|
| wireless router, dsl modem | |
| 3rd Party Firmware | |
| dd-wrt | Status Unknown | 
| OpenWrt | Not Supported | 
| Tomato any flavor | Status Unknown | 
| Platform | |
| Brand • Model • Rev | SerComm SHG1500 VS2 | 
| FCC ID | none specified | 
| Type | wireless router, dsl modem | 
| CPU1  | Broadcom BCM6361 | 
| CPU1 Type | BMIPS4350 | 
| CPU1 Speed | 400 MHz ( 2 cores ) | 
| Flash1 Chip | Brand? Model? | 
| Flash1 Size | 64 MiB 67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> (NAND) | 
| RAM1 Size | 128 MiB 134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> | 
| RAM1 Chip | Brand? Model? | 
| ETH chip1 | Broadcom BCM6361 | 
| Ethernet Port Count | 4-1GbE-LAN | 
| Wired Standard | IEEE 802.3i/3u/3ab | 
| 802dot11 OUI: none specified | |
| Stock bootloader | CFE | 
| Expansion IF types | USB 2.0 | 
| USB ports | 3 | 
| USB Hub Compatible | Untested | 
| Serial Port (UART) | yes | 
| JTAG Port | yes | 
| Flags: | |
|  | |
|  | |
| Radio 1 | |
| Chip1 | Broadcom BCM6361 | 
| Wireless interface OUI | none specified | 
| Antenna Connector Type | none specified | 
| MIMO status | 2x2:2 | 
| Wireless Standard | IEEE 802.11b/g/n | 
| 802.11n | up to 300 Mbps | 
| 802.11g | up to 54 Mbps | 
| 802.11b | up to 11 Mbps | 
| WiFi Operating Frequency | 2.4 GHz | 
| Radio 2 | |
| Chip1 | Brand? Model? | 
| Wireless interface OUI | none specified | 
| Antenna Connector Type | none specified | 
| Wireless Standard | IEEE 802.11a/n | 
| WiFi Operating Frequency | 5 GHz | 
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented SerComm devices with specifications, see SerComm.
Overview
OpenWrt HWData states 5 GHz chip is Broadcom BCM6361 integrated, however docs state 2.4 GHz only.
Flashing
|  | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. | 
Flashing OpenWrt
|  | This device is NO LONGER SUPPORTED OR POSSIBLE for future use with OpenWrt. | 
OpenWrt Target: brcm63xx
OpenWrt Subtarget: generic
OpenWrt Package architecture: mips_mips32
Support started version: Never supported
Current supported version: Never supported
OpenWrt Subtarget: generic
OpenWrt Package architecture: mips_mips32
Support started version: Never supported
Current supported version: Never supported
Unsupported Functions:
Never supported
Never supported
Please insert instructions here
Categories: 
- SerComm
- Embedded system/wireless router
- Embedded system/dsl modem
- Embedded System Broadcom
- Embedded System BCM6361
- Broadcom
- Embedded System BMIPS4350
- Embedded System
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Embedded System IEEE 802.11a/n
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- English Documentation



