Shuttle OmniNAS KD20
| OMNINAS Your Own Private Cloud | |
 | |
| Homepage | Product page |
|---|---|
| WikiDevi.wi-cat.ru | Shuttle OmniNAS KD20 |
| 3rd Party Firmware | |
| dd-wrt | Status Unknown |
| OpenWrt | Partial Support |
| Tomato any flavor | Incompatible |
| Gargoyle | Status Unknown |
| Platform | |
| Brand • Model • Rev | Shuttle OmniNAS KD20 |
| Type | NAS enclosure |
CPU1  | PLX Technology NAS7821 |
| CPU1 Type | ARM11MP |
| CPU1 Speed | 750 MHz ( 2 cores ) |
| Flash1 Chip | SK hynix H27U1G8F2BTR-BC |
| Flash1 Size | 128 MiB 134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (NAND) |
| RAM1 Size | 256 MiB 268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> |
| RAM1 Chip | SK hynix H5PS1G63JFR-S6C x 2 |
| ETH chip1 | PLX Technology NAS7821 |
| ETH chip2 | IC+ IP1001 |
| Ethernet Port Count | 1-1GbE-LAN |
| Wired Standard | IEEE 802.3i/3u/3ab |
|
Ethernet OUI: 80:EE:73 | |
| Stock bootloader | U-Boot 1.1.2 |
| Stock FW OS | Linux 2.6.31.14 |
| Expansion IF types | USB 2.0, USB 3.0, SD Card slot, SATA |
| USB ports | 3 |
| SD/MMC Slots | 1 |
| SATA Ports | 2 |
| USB Hub Compatible | Untested |
| Power | 19 VDC, 3.42 A |
| Connector type | barrel |
| Serial Port (UART) | yes, 5-pin header, unpopulated, CON5, 3.3V TTL, (115200 8N1) |
|
Flags: | |
|
Additional chips | |
| Other | |
|
Default IP address: 169.254.100.200 | |
| 3rd Party Firmware Support |
OpenWrt • (List | Dev | DLs) , Debian |
| Retail | |
| Availability | End of Life |
| End of Life date | 2015 |
| (Est.) release date | October 2012 |
| (Est.) initial retail price (in USD): | $166 |
| UPC |
811686003960 (UPC DB, On eBay) |
| Newegg | N82E16822114001 |
| ASINs |
B008RLHQ7E  B00BXAVDLQ |
| Country of manuf | China |
For a list of all currently documented IC+ chipsets with specifications, see IC+.
For a list of all currently documented PLX Technology SoC's with specifications, see PLX Technology.
Overview
"KD20 MB VER:1.0" and "P/N:71R-KD2006-T810"
- are silkscreened on the board.
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
Subtarget: ox820
Package architecture: arm_mpcore
Supported Since Commit
Support started version: 17.01.0
Current supported version: 23.05.6
SDcard, USB 3.0
Installation method(s):
GUI OEM, see devicepage
Recovery method(s):
U-Boot TFTP + serial recovery
Comment:
GPL sources: http://data.shuttle.eu/~upload/omninas/KD20_20121127.zip; Factory image build disabled with commit b0b7f2b8f3a6bba4
| git • >> |
|---|
add new target 'oxnas' This is the oxnas target previously developed at http://gitorious.org/openwrt-oxnas Basically, this consolidates the changes and addtionas from http://github.org/kref/linux-oxnas into a new OpenWrt hardware target 'oxnas' adding support for PLX Technology NAS7820/NAS7821/NAS7825/... formally known as Oxford Semiconductor OXE810SE/OXE815/OX820/... For now there are 4 supported boards: Cloud Engines Pogoplug V3 (without PCIe) fully supported Cloud Engines Pogoplug Pro (with PCIe) fully supported MitraStar STG-212 aka ZyXEL NSA-212, aka Medion Akoya P89625 / P89636 / P89626 / P89630, aka Medion MD 86407 / MD 86805 / MD 86517 / MD 86587 fully supported, see http://wiki.openwrt.org/toh/medion/md86587 Shuttle KD-20 partially supported (S-ATA driver lacks support for 2nd port) Signed-off-by: Daniel Golle SVN-Revision: 43388 |
