Sitecom WL-105b
bg (G54) | |
---|---|
access point | |
InfoDepot Wiki | |
WikiDevi.wi-cat.ru | |
3rd Party Firmware | |
dd-wrt | |
OpenWrt |
Incompatible |
Tomato any flavor |
Incompatible |
Gargoyle |
Status Unknown |
Platform | |
Brand • Model • Rev |
Sitecom WL-105b |
FCC ID | |
Type |
access point |
CPU1 |
Broadcom BCM4702 |
CPU1 Type |
BMIPS3300 |
CPU1 Speed |
125 MHz |
Flash1 Chip |
AMD Am29LV320DB-90EI |
Flash1 Size |
4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> |
RAM1 Size |
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> |
RAM1 Chip |
Dynachips D98SD6416AH-6 |
ETH chip1 |
Broadcom BCM4702 |
ETH chip2 |
Altima AC101L |
Ethernet Port Count |
1-100MbE-LAN |
Wired Standard |
IEEE 802.3/3u |
802dot11 OUI: none specified | |
Expansion IF types |
Mini PCI |
Mini PCI slots |
1 |
Power |
5 VDC, 2.5 A |
Connector type |
barrel |
JTAG Port |
yes |
Other | |
Default IP address: 192.168.1.250 | |
Manuf/OEM/ODM |
Gemtek WX5520A |
3rd Party Firmware Support | |
Retail | |
(Est.) release date | 2003 |
Radio 1 | |
Radio1 module | |
Radio1 module IF |
Mini PCI |
Chip1 |
Broadcom BCM4306 |
Chip2 |
Broadcom BCM2050 |
Wireless interface OUI |
none specified |
Antenna Connector Type |
none specified |
Wireless Standard |
IEEE 802.11b/g |
802.11g |
up to 54 Mbps |
802.11b |
up to 11 Mbps |
WiFi Operating Frequency |
2.4 GHz |
Radio cor_rev |
4 |
For a list of all currently documented Altima chipsets with specifications, see Altima.
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Sitecom device with specifications, see Sitecom.
- • 54 Mbps - 2.4GHz 802.11g = G54 class
Overview
OEM Gemtek WX5520A (WX5520A_V02)
The DD-WRT supported devices table states the FCC ID for this device is MXF-A910910AB. This FCC ID has a BCM4301+BCM2051 card and an Atheros AR5000 card for 802.11a. This access point appears to use a BCM4306+BCM2050 card [1].
Links of Interest
Flashing
NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing dd-wrt
Supported by dd-wrt as of = v24 must use VINT build
Please insert instructions here
Pictures
- Sitecom
- Embedded system/access point
- Embedded System Broadcom
- Embedded System BCM4702
- Broadcom
- Embedded System BMIPS3300
- Embedded System
- Embedded System AC101L
- Embedded System Altima
- Altima
- Manuf Gemtek
- DD-WRT Supported
- Embedded System BCM4306
- Embedded System BCM2050
- Embedded System IEEE 802.11b/g
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- English Documentation