SmartRG SDG-9000
From TechInfoDepot
Jump to navigationJump to search
| 10G PoE++ Router | |
 | |
| 3rd Party Firmware | |
|---|---|
| dd-wrt | Status Unknown |
| OpenWrt | Supported |
| Tomato any flavor | Incompatible |
| Gargoyle | Status Unknown |
| Platform | |
| Brand • Model • Rev | SmartRG SDG-9000 |
| Type | router |
CPU1  | MediaTek MT7988A |
| CPU1 Type | ARM Cortex-A73 |
| CPU1 Speed | 1.8 GHz ( 4 cores ) 64-bit |
| Flash1 Chip | Brand? Model? |
| Flash1 Size | 32 GiB 32,768 MiB <br />34,359,738,368 B <br />268,435,456 Kib <br />33,554,432 KiB <br />262,144 Mib <br /> (eMMC) |
| RAM1 Size | 4 GiB 4,096 MiB <br />4,294,967,296 B <br />33,554,432 Kib <br />4,194,304 KiB <br />32,768 Mib <br /> (DDR4) |
| RAM1 Chip | Brand? Model? |
| ETH chip1 | MediaTek MT7988A |
| ETH chip2 | Marvell CUX3410 |
| Switch | MaxLinear MXL86282 |
| Ethernet Port Count |
2-10GbE-WAN 8-2.5GbE-LAN |
| Wired Standard | IEEE 802.3i/3u/3ab/3bz |
| Port-based vlan | yes |
| 802.1q vlan | yes |
|
| |
| Stock bootloader | U-Boot |
| Expansion IF types | USB 3.0 type A, SFP+ |
| USB ports | 1 |
| SFP ports | 1 |
| USB Hub Compatible | Untested |
| Power | 100-240 VAC ~ 50/60 Hz, ? A |
| Connector type | C14 |
| Serial Port (UART) | yes, USB-C, (115200 8N1) |
|
| |
|
| |
| Other | |
|
| |
| 3rd Party Firmware Support |
OpenWrt • (List | Dev | DLs) |
For a list of all currently documented Marvell chipsets with specifications, see Marvell.
For a list of all currently documented MaxLinear (Intel) chipsets with specifications, see MaxLinear (Intel).
For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.
For a list of all currently documented SmartRG devices with specifications, see SmartRG.
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
 | The development branch can contain experimental code that is under active development and should not be used for production environments. Snapshot images may support additional hardware; however, it is experimental, considered unstable, and sometimes won't compile. |
| Prebuilt snapshot images do not come with any web interface or GUI. You will need to be comfortable using a command line and remote shell to install one yourself → How to install LuCI |
Target: mediatek
Subtarget: filogic
Package architecture: aarch64_cortex-a53
Supported Since Commit
Support started version: unknown
Current supported version: snapshot
Subtarget: filogic
Package architecture: aarch64_cortex-a53
Supported Since Commit
Support started version: unknown
Current supported version: snapshot
LAN Hardware: MaxLinear MxL86282
LAN Comment: 8x 2.5GbE w/PoE+ via 2 Skyworks Si3474 PSE controllers, 2x 10GbE via Marvell CUX3410 PHY one shared with SFP+ cage (selected at boot)
USB SATA Comment: USB 3.0 type A port, 1x USB-C console port
Installation method(s):
see git-commit
Recovery method(s):
see git-commit
LAN Comment: 8x 2.5GbE w/PoE+ via 2 Skyworks Si3474 PSE controllers, 2x 10GbE via Marvell CUX3410 PHY one shared with SFP+ cage (selected at boot)
USB SATA Comment: USB 3.0 type A port, 1x USB-C console port
Installation method(s):
see git-commit
Recovery method(s):
see git-commit
Please insert instructions here
Categories:
- SmartRG
- Embedded system/router
- Embedded System MediaTek
- Embedded System MT7988A
- MediaTek
- Embedded System ARM
- Embedded System Cortex-A73
- Embedded System CUX3410
- Embedded System Marvell
- Marvell
- Embedded System MaxLinear
- Embedded System MXL86282
- MaxLinear
- OpenWrt Supported
- Wired Embedded System
- Embedded System
- English Documentation
- New Entry
