Database changes have finished applying - please report any issues you're (still) seeing to support@shoutwiki.com.
SmartRG SR400ac
From TechInfoDepot
Jump to navigationJump to search
abgn+ac (AC1900) | |||||
---|---|---|---|---|---|
Broadband Wi-Fi Router Dual-Band Gigabit | |||||
![]() | |||||
Homepage | Product page | ||||
WikiDevi.wi-cat.ru | SmartRG SR400ac | ||||
3rd Party Firmware | |||||
dd-wrt | Status Unknown | ||||
OpenWrt | Partial Support | ||||
Tomato any flavor | Status Unknown | ||||
Gargoyle | Status Unknown | ||||
Platform | |||||
Brand • Model • Rev | SmartRG SR400ac | ||||
FCC ID | VW7SR400AC | ||||
IC ID | 11130A-SR400AC | ||||
Type | range extender | ||||
CPU1 ![]() | Broadcom BCM4708A0 | ||||
CPU1 Type | ARM Cortex-A9 | ||||
CPU1 Speed | 800 MHz ( 2 cores ) | ||||
Flash1 Chip | Spansion Model? | ||||
Flash1 Size | ? MiB | ||||
RAM1 Size | ? MiB | ||||
RAM1 Chip | Brand? Model? | ||||
ETH chip1 | Broadcom BCM4708A0 | ||||
Switch | Broadcom BCM4708A0 | ||||
Ethernet Port Count |
1-1GbE-WAN 4-1GbE-LAN | ||||
Wired Standard | IEEE 802.3i/3u/3ab | ||||
802dot11 OUI: none specified | |||||
Stock bootloader | CFE | ||||
Expansion IF types | USB 2.0, USB 3.0 | ||||
USB ports | 2 | ||||
USB Hub Compatible | Untested | ||||
Power | 12 VDC, 3 A | ||||
Connector type | barrel | ||||
Serial Port (UART) | yes, 3.3V TTL, (115200 8N1) | ||||
Flags: | |||||
| |||||
Other | |||||
Default SSID: SmartRG_XXXX | |||||
3rd Party Firmware Support |
OpenWrt • (List | Dev | DLs) | ||||
Retail | |||||
Availability | End of Life | ||||
FCC approval date | 24 December 2015 | ||||
Newegg | 0E6-01MS-00001 | ||||
ASIN |
B071F9NQHV ![]() multiple uses | ||||
Country of manuf | China | ||||
Radio 1 | |||||
Chip1 | Broadcom BCM43602 | ||||
Wireless interface OUI | none specified | ||||
Antenna Connector Type | soldered | ||||
MIMO status | 3x3:3 | ||||
Wireless Standard | IEEE 802.11b/g/n | ||||
N-QAM | up to 600 Mbps | ||||
802.11n | up to 450 Mbps | ||||
802.11g | up to 54 Mbps | ||||
802.11b | up to 11 Mbps | ||||
WiFi Operating Frequency | 2.4 GHz | ||||
Radio cor_rev | 40 | ||||
Radio 2 | |||||
Chip1 | Broadcom BCM43602 | ||||
Wireless interface OUI | none specified | ||||
Antenna Connector Type | U.FL | ||||
MIMO status | 3x3:3 | ||||
Wireless Standard | IEEE 802.11a/n/ac | ||||
802.11ac | up to 1300 Mbps | ||||
802.11n | up to 450 Mbps | ||||
802.11a | up to 54 Mbps | ||||
WiFi Operating Frequency | 5 GHz | ||||
Radio cor_rev | 40 | ||||
|
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented SmartRG devices with specifications, see SmartRG.
Flashing
![]() | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
![]() | Devices with Broadcom WiFi chipsets have limited OpenWrt supportability (due to limited FLOSS driver availability for Broadcom chips). Consider this when choosing a device to buy, or when deciding to flash OpenWrt on your device because it is listed as supported. See Broadcom WiFi for details. |
On the OpenWrt ToH (techdata entry)
OpenWrt Target: bcm53xx
OpenWrt Subtarget: generic
OpenWrt Package architecture: arm_cortex-a9
Support started version: 17.01.0
Current supported version: 24.10.0
Unsupported Functions:
Secondary 256 MiB flash chip
OpenWrt Target: bcm53xx
OpenWrt Subtarget: generic
OpenWrt Package architecture: arm_cortex-a9
Support started version: 17.01.0
Current supported version: 24.10.0
Unsupported Functions:
Secondary 256 MiB flash chip
Please insert instructions here
Pictures
Categories:
- SmartRG
- Embedded system/range extender
- Embedded System Broadcom
- Embedded System BCM4708A0
- Broadcom
- Embedded System ARM
- Embedded System Cortex-A9
- OpenWrt Supported
- Embedded System BCM43602
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Embedded System IEEE 802.11a/n/ac
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- Embedded System
- English Documentation