Smartenit Harmony P2
From TechInfoDepot
Jump to navigationJump to search
ZigBee (ZigBee) | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Home Automation Hub | |||||||||||||
![]() | |||||||||||||
Homepage | Product page | ||||||||||||
3rd Party Firmware | |||||||||||||
dd-wrt | Status Unknown | ||||||||||||
OpenWrt | Supported | ||||||||||||
Tomato any flavor | Incompatible | ||||||||||||
Gargoyle | Status Unknown | ||||||||||||
Platform | |||||||||||||
Brand • Model • Rev | Smartenit Harmony P2 | ||||||||||||
Model Part Number | 6007C | ||||||||||||
FCC ID | TY0JN5148M3 | ||||||||||||
IC ID | 7438A-CYO5148M3 | ||||||||||||
Type | home automation controller, IoT hub, IoT | ||||||||||||
CPU1 ![]() | Marvell 88F6192 | ||||||||||||
CPU1 Type | ARMv5 Feroceon core | ||||||||||||
CPU1 Speed | 1.0 GHz | ||||||||||||
Flash1 Chip | SK hynix H27U1G8F2BTR | ||||||||||||
Flash1 Size | 128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> | ||||||||||||
RAM1 Size | 128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> | ||||||||||||
RAM1 Chip | SK hynix H5PS1G63EFR | ||||||||||||
ETH chip1 | Marvell 88F6192 | ||||||||||||
ETH chip2 | Marvell 88E1116R | ||||||||||||
Ethernet Port Count | 1-1GbE-LAN | ||||||||||||
Wired Standard | IEEE 802.3i/3u/3ab | ||||||||||||
802dot11 OUI: none specified | |||||||||||||
Stock bootloader | U-Boot 1.1.4 Cloud Engines (3.2.27) | ||||||||||||
Stock FW OS | Linux 3.3.8 | ||||||||||||
Expansion IF types | USB 2.0, SDHC | ||||||||||||
USB ports | 1 | ||||||||||||
SD/MMC Slots | 1 | ||||||||||||
USB Hub Compatible | Untested | ||||||||||||
Power | 12 VDC, 1 A | ||||||||||||
Connector type | barrel | ||||||||||||
Serial Port (UART) | yes, 4-pad header, 3.3V TTL, (115200 8N1), J11 | ||||||||||||
JTAG Port | yes, 6-pin header, J17 | ||||||||||||
Flags: | |||||||||||||
Additional chips | |||||||||||||
Other | |||||||||||||
| |||||||||||||
3rd Party Firmware Support |
OpenWrt • (List | Dev | DLs) , Debian | ||||||||||||
Retail | |||||||||||||
FCC approval date | 14 March 2012 | ||||||||||||
(Est.) initial retail price (in USD): | $59.99 | ||||||||||||
ASINs |
B00JPS4H1Q ![]() B07B9PSL1M ![]() | ||||||||||||
Country of manuf | China | ||||||||||||
Radio 1 | |||||||||||||
Radio1 module | Jennic JN5148-001 | ||||||||||||
Radio1 module IF | Serial (module) | ||||||||||||
Chip1 | NXP JN5148 | ||||||||||||
Wireless interface OUI | none specified | ||||||||||||
Antenna Connector Type | RP-SMA | ||||||||||||
Wireless Standard | ZigBee | ||||||||||||
|
For a list of all currently documented Marvell chipsets with specifications, see Marvell.
For a list of all currently documented NXP (Freescale) SoC's with specifications, see NXP.
Overview
- This is a relabeled Cloud Engines Pogoplug v4 A1 (Mobile) with a Jennic ZigBee card attached to the serial pins.
Hardware specification
- CPU: Marvell Kirkwood 88F6192 @1.0GHz
- Storage: 128MB (NAND) flash,
- TF card (max.32GB)/MMC card slot
- Memory: 128MB (DDR2) SDRAM
- Network: 1x Gigabit Ethernet port
- USB: 1x USB 2.0 port
- Wireless: Zigbee (802.15.4)
- Power Source: 12V/1A via barrel
Flashing
![]() | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
Support started version: ?
Current supported version: ?
Current supported version: ?
Please insert instructions here
Pictures
See also
- Smartenit Harmony G1 (6007D)
- Smartenit Harmony G2 (6007E)
- Smartenit Harmony P2 (6007C)
Categories:
- Smartenit
- Embedded system/home automation controller
- Embedded system/IoT hub
- Embedded system/IoT
- Embedded System Marvell
- Embedded System 88F6192
- Marvell
- Embedded System ARMv5
- Embedded System Feroceon core
- Embedded System 88E1116R
- OpenWrt Supported
- Embedded System NXP
- Embedded System JN5148
- NXP
- Embedded System ZigBee
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- Embedded System
- English Documentation