Database changes have finished applying - please report any issues you're (still) seeing to support@shoutwiki.com.
StarFive VisionFive
bgn (N150) | |||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
RISC-V Development Board | |||||||||||||||||
![]() | |||||||||||||||||
Homepage | Product page | ||||||||||||||||
3rd Party Firmware | |||||||||||||||||
dd-wrt | Status Unknown | ||||||||||||||||
OpenWrt | Supported | ||||||||||||||||
Tomato any flavor | Incompatible | ||||||||||||||||
Gargoyle | Status Unknown | ||||||||||||||||
Platform | |||||||||||||||||
Brand • Model • Rev | StarFive VisionFive v1 | ||||||||||||||||
FCC ID | none specified | ||||||||||||||||
Type | single-board computer, development board | ||||||||||||||||
CPU1 ![]() | StarFive JH7100 | ||||||||||||||||
CPU1 Speed | 1.0 GHz ( 2 cores ) | ||||||||||||||||
Flash1 Chip | GigaDevice GD25LQ128EWIG | ||||||||||||||||
Flash1 Size | 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> | ||||||||||||||||
RAM1 Size | 8 GiB 8,192 MiB <br />8,589,934,592 B <br />67,108,864 Kib <br />8,388,608 KiB <br />65,536 Mib <br /> | ||||||||||||||||
RAM1 Chip | SK hynix H9HCNNNCPUML-XRNEE x 2 | ||||||||||||||||
ETH chip1 | StarFive JH7100 | ||||||||||||||||
ETH chip2 | Motorcomm YT8521SH | ||||||||||||||||
Ethernet Port Count | 1-1GbE-LAN | ||||||||||||||||
Wired Standard | IEEE 802.3i/3u/3ab | ||||||||||||||||
Stock bootloader | U-Boot | ||||||||||||||||
Stock FW OS | Linux | ||||||||||||||||
Expansion IF types | USB 3.0, Micro SD Card slot | ||||||||||||||||
USB ports | 4 | ||||||||||||||||
SD/MMC Slots | 1 | ||||||||||||||||
USB Hub Compatible | Untested | ||||||||||||||||
Power | 5 VDC, 3 A | ||||||||||||||||
Connector type | USB Female (Type-C) | ||||||||||||||||
Serial Port (UART) | yes, 3-pin header, populated, 3.3V TTL, (9600 8N1) | ||||||||||||||||
JTAG Port | no | ||||||||||||||||
Flags: Micro SD Card slot, HDMI 1.4, MIPI DSI, MIPI CSI, Audio out (3.5mm), Bluetooth 4.2 (BLE), I2C, I2S, SPI, UART | |||||||||||||||||
Additional chips | |||||||||||||||||
Other | |||||||||||||||||
| |||||||||||||||||
3rd Party Firmware Support |
OpenWrt • (List | Dev | DLs) | ||||||||||||||||
Retail | |||||||||||||||||
(Est.) release date | December 2021 | ||||||||||||||||
(Est.) initial retail price (in USD): | $175 | ||||||||||||||||
ASIN |
B09NKVR2QG ![]() | ||||||||||||||||
Country of manuf | China | ||||||||||||||||
Radio 1 | |||||||||||||||||
Radio1 module | AMPAK AP6236 | ||||||||||||||||
Radio1 module IF | SDIO 2.0 | ||||||||||||||||
Chip1 | Broadcom BCM43436 | ||||||||||||||||
Wireless interface OUI | 70:4A:0E | ||||||||||||||||
Antenna Connector Type | U.FL | ||||||||||||||||
MIMO status | 1x1:1 | ||||||||||||||||
Wireless Standard | IEEE 802.11b/g/n | ||||||||||||||||
802.11n | up to 150 Mbps | ||||||||||||||||
802.11g | up to 54 Mbps | ||||||||||||||||
802.11b | up to 11 Mbps | ||||||||||||||||
WiFi Operating Frequency | 2.4 GHz | ||||||||||||||||
|
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
Motorcomm not currently documented.
For a list of all currently documented StarFive chipsets with specifications, see StarFive.
For a list of all currently documented StarFive devices with specifications, see StarFive.
- • 150 Mbps - 1SS 2.4GHz 802.11n (40MHz chan.) = N150 class
Overview
"VisionFive v1" is silkscreened on board top.
Hardware specification
- CPU: StarFive JH7100-U74x2 @1.0GHz Dual-Core
- SoC: RISC-V; NPU: NVDLA Engine 1 core 3.5 TOPS
- VPU: H.264/H.265 decoder up to 4Kp60,
- dual-stream decoding up to 4Kp30
- Storage: 16MB (SPI) Flash,
- TF card (max.128GB)/MMC card
- 802.11bgn (1T1R), BT 4.2 BLE
- Network: 1x GbE port (w/ PoE support)
- USB: 4x USB 3.1 ports
- GPIO: 1x 40-pin headers
- Power Source: USB Type-C supporting USB
- PD 2.0 and Qualcomm Quick Charge 3.0
Links of Interest
- BeagleV RISC-V SBC reborn as VisionFive V1 on LinuxGizmos
- VisionFive V1 RISC-V Linux SBC on CNX|Software
Flashing
![]() | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
![]() | The development branch can contain experimental code that is under active development and should not be used for production environments. Snapshot images may support additional hardware; however, it is experimental, considered unstable, and sometimes won't compile. |
![]() | Prebuilt snapshot images do not come with any web interface or GUI. You will need to be comfortable using a command line and remote shell to install one yourself → How to install LuCI |
![]() | Devices with Broadcom WiFi chipsets have limited OpenWrt supportability (due to limited FLOSS driver availability for Broadcom chips). Consider this when choosing a device to buy, or when deciding to flash OpenWrt on your device because it is listed as supported. See Broadcom WiFi for details. |
OpenWrt Target: starfive
OpenWrt Subtarget: generic
OpenWrt Package architecture: riscv64_riscv64
Support started version: ?
Current supported version: snapshot
Please insert instructions here
Pictures
See also
- CPU: StarFive JH7110 @1.5GHz
- StarFive
- Embedded system/single-board computer
- Embedded system/development board
- Embedded System StarFive
- Embedded System JH7100
- Embedded System YT8521SH
- Embedded System Motorcomm
- Motorcomm
- OpenWrt Supported
- Embedded System Broadcom
- Embedded System BCM43436
- Broadcom
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- Single-Band
- Embedded System
- English Documentation