Storlink SL93512r
From TechInfoDepot
(Redirected from StorLink SL93512r)
Jump to navigationJump to search
Single Board Computer | |
3rd Party Firmware | |
---|---|
dd-wrt | Status Unknown |
OpenWrt | Supported |
Tomato any flavor | Incompatible |
Gargoyle | Status Unknown |
Platform | |
Brand • Model • Rev | Storlink SL93512r |
Type | single-board computer |
CPU1 ![]() | Storm SL93512 |
CPU1 Speed | 300 MHz |
Flash1 Chip | Brand? Model? |
Flash1 Size | 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> |
RAM1 Size | 64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> |
RAM1 Chip | Brand? Model? |
ETH chip1 | Marvell 88E1111 |
Switch | Vitesse VSC7385 |
Ethernet Port Count | 4-1GbE-LAN |
Wired Standard | IEEE 802.3i/3u/3ab |
| |
Stock bootloader | RedBoot |
Expansion IF types | SATA |
SATA Ports | 2 |
Serial Port (UART) | yes, (19200 8N1} |
| |
| |
Other | |
| |
3rd Party Firmware Support |
OpenWrt • (List | Dev | DLs) |
For a list of all currently documented Marvell chipsets with specifications, see Marvell.
For a list of all currently documented Storlink (Storm) SoC's with specifications, see Storlink.
For a list of all currently documented Microsemi (Vitesse) chipsets with specifications, see Microsemi.
For a list of all currently documented Storlink devices with specifications, see Storlink.
Flashing
![]() | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
On the OpenWrt ToH (techdata entry)
OpenWrt Target: gemini
OpenWrt Subtarget: generic
OpenWrt Package architecture: arm_fa526
Support started version: 21.02.0
Current supported version: 24.10.2
LAN Comment:
Marvell 88E1111 Phy
OpenWrt Target: gemini
OpenWrt Subtarget: generic
OpenWrt Package architecture: arm_fa526
Support started version: 21.02.0
Current supported version: 24.10.2
LAN Comment:
Marvell 88E1111 Phy
Please insert instructions here