Strix Systems EWS-100

From TechInfoDepot
Jump to navigationJump to search
abg (AG108)
CPE,access point
3rd Party Firmware
dd-wrt
Status Unknown
OpenWrt
Status Unknown
Tomato any flavor
Incompatible
Platform
BrandModelRev
Strix Systems EWS-100
FCC ID
Type
CPE, access point
CPU1
Atheros AR5312A
CPU1 Type
MIPS R4000
CPU1 Speed
220 MHz
Flash1 Chip
Macronix Model?
Flash1 Size
? MiB
RAM1 Size
? MiB
RAM1 Chip
ISSI Model?
ETH chip1
Atheros AR5312A
ETH chip2
IC+ IP101
Ethernet Port Count
1-100MbE-LAN
Wired Standard
IEEE 802.3i/3u

802dot11 OUI: 00:0E:8E (3 E, 38 W)
Ethernet OUI: 00:0E:8E (3 E, 38 W)

Expansion IF types
none specified
Power
5 VDC, 2.5 A
Connector type
barrel
Other

Default SSID: Strix Wireless Network - 0
Default IP address: 192.168.1.250
the IP 192.168.1.250 is used by 25 additional devices
of which 0 are Strix Systems devices
Default login user: Admin
Default login password: Admin
Admin:Admin credentials used by 16 additional devices
of which 1 are Strix Systems devices

Manuf/OEM/ODM
Gemtek WRTA-119AG
Retail
FCC approval date 16 August 2005
Country of manuf Taiwan
Radio 1
Chip1
Atheros AR5312A
Chip2
Atheros AR2112A
Wireless interface OUI
00:0E:8E
Antenna Connector Type
U.FL, RP-SMA
Wireless Standard
IEEE 802.11b/g
802.11g
up to 54 Mbps
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz
Radio 2
Chip1
Atheros AR5312A
Chip2
Atheros AR5112A
Wireless interface OUI
00:0E:8E
Antenna Connector Type
U.FL, RP-SMA
Wireless Standard
IEEE 802.11a
802.11a
up to 54 Mbps
WiFi Operating Frequency
5 GHz
 FCC ID
SparkLAN WX-7800ARYK-7800A

For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented IC+ chipsets with specifications, see IC+.

54 Mbps - 5GHz 802.11a
54 Mbps - 2.4GHz 802.11g = AG108 class

Overview

"WRTA-119AG_V01" and "109-102-4500" is silkscreened on the board in the FCC photos.

OEM Gemtek WRTA-119AG (SparkLAN WX-7800A)

It appears that this device will, by default, attempt to connect to a network with SSID Strix Wireless Network with the 802.11a radio. The 802.11bg radio functions in AP mode.

The default firmware is meant to be configured via telnet. There does not appear to be a web configuration interface.