TP-LINK CPE610 v1
From TechInfoDepot
Jump to navigationJump to search
| an (A300) | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 5GHz 300Mbps 23dBi Outdoor CPE | |||||||||||||
 | |||||||||||||
| Homepage | Product page | ||||||||||||
| Wikipedia | TP-Link | ||||||||||||
| 3rd Party Firmware | |||||||||||||
| dd-wrt | Status Unknown | ||||||||||||
| OpenWrt | Supported | ||||||||||||
| Tomato any flavor | Incompatible | ||||||||||||
| Gargoyle | Status Unknown | ||||||||||||
| Platform | |||||||||||||
| Brand • Model • Rev | TP-LINK CPE610 v1 | ||||||||||||
| FCC ID | TE7CPE610 | ||||||||||||
| Type | access point | ||||||||||||
CPU1  | Atheros AR9350 | ||||||||||||
| CPU1 Speed | 560 MHz | ||||||||||||
| Flash1 Chip | Brand? Model? | ||||||||||||
| Flash1 Size | 8 MiB 8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> | ||||||||||||
| RAM1 Size | 64 MiB 67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> | ||||||||||||
| RAM1 Chip | Brand? Model? | ||||||||||||
| ETH chip1 | Atheros AR9350 | ||||||||||||
| Ethernet Port Count | 1-100MbE-LAN | ||||||||||||
| Wired Standard | IEEE 802.3i/3u | ||||||||||||
|
802dot11 OUI: none specified | |||||||||||||
| Stock bootloader | U-Boot | ||||||||||||
| Expansion IF types | none specified | ||||||||||||
| PoE | Passive | ||||||||||||
| Power | 24 VDC, 0.5 A | ||||||||||||
|
Flags: | |||||||||||||
|
| |||||||||||||
| Other | |||||||||||||
|
| |||||||||||||
| 3rd Party Firmware Support |
OpenWrt • (List | Dev | DLs) | ||||||||||||
| Retail | |||||||||||||
| Availability | End of Life | ||||||||||||
| Radio 1 | |||||||||||||
| Chip1 | Atheros AR9350 | ||||||||||||
| Wireless interface OUI | none specified | ||||||||||||
| Antenna Connector Type | none specified | ||||||||||||
| MIMO status | 2x2:2 | ||||||||||||
| Wireless Standard | IEEE 802.11a/n | ||||||||||||
| 802.11n | up to 300 Mbps | ||||||||||||
| 802.11a | up to 54 Mbps | ||||||||||||
| WiFi Operating Frequency | 5 GHz | ||||||||||||
| |||||||||||||
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented TP-LINK devices with specifications, see TP-LINK.
- • 300 Mbps - 2SS 5GHz 802.11n (40MHz chan.) = A300 class
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
 | This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram.
DO NOT BUY DEVICES WITH 8MB FLASH / 64MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 8/64 warning for details. This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation. This means that you will not be able to install many packages, and that you might experience crashes due to OOM situations more or less often. See OpenWrt on 8/64 devices what you can do now. |
Target: ath79
Subtarget: generic
Package architecture: mips_24kc
Supported Since Commit
Support started version: 21.02.0
Current supported version: 25.12.1
Subtarget: generic
Package architecture: mips_24kc
Supported Since Commit
Support started version: 21.02.0
Current supported version: 25.12.1
Unsupported Functions:
Pharos MAXtream
WLAN Hardware: Atheros AR9350
WLAN Comment: 2x2:2 MIMO
Installation method(s):
GUI OEM, TP-Link TFTP, U-Boot TFTP recovery, see git-commit
Pharos MAXtream
WLAN Hardware: Atheros AR9350
WLAN Comment: 2x2:2 MIMO
Installation method(s):
GUI OEM, TP-Link TFTP, U-Boot TFTP recovery, see git-commit
| git • >> |
|---|
ath79: add support for TP-Link CPE610-v1 TP-Link CPE610-v1 is an outdoor wireless CPE for 5 GHz with one Ethernet port based on Atheros AR9344 Specifications: - Based on the same underlying hardware as the TP-Link CPE510 - Power, LAN, WLAN5G green LEDs - 23dBi high-gain directional 2×2 MIMO antenna and a dedicated metal reflector Flashing instructions: Flash factory image through stock firmware WEB UI or through TFTP To get to TFTP recovery just hold reset button while powering on for around 4-5 seconds and release. Rename factory image to recovery.bin Stock TFTP server IP:192.168.0.100 Stock device TFTP adress:192.168.0.254 |
