TP-LINK EAP620 HD v1
From TechInfoDepot
Jump to navigationJump to searchabgn+ac+ax (AX1800) | |
---|---|
AX1800 Wireless Dual Band Ceiling Mount Access Point | |
Homepage | |
Wikipedia | |
3rd Party Firmware | |
dd-wrt |
Status Unknown |
OpenWrt | |
Tomato any flavor |
Incompatible |
Gargoyle |
Status Unknown |
Platform | |
Brand • Model • Rev |
TP-LINK EAP620HD v1 |
FCC ID |
none specified |
Type |
access point |
CPU1 ![]() |
Qualcomm IPQ8072A |
CPU1 Type |
ARM Cortex-A53 |
CPU1 Speed |
1.4 GHz ( 4 cores ) 64-bit |
Flash1 Chip |
Winbond W29N01HZSINF |
Flash1 Size |
128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> |
RAM1 Size |
1 GiB 1,024 MiB <br />1,073,741,824 B <br />8,388,608 Kib <br />1,048,576 KiB <br />8,192 Mib <br /> (DDR3 -1866) |
RAM1 Chip |
ESMT M15T4G16256A-DEBG2G x 2 |
ETH chip1 |
Qualcomm IPQ8072A |
ETH chip2 |
Atheros AR8031 |
Ethernet Port Count |
1-1GbE-LAN |
Wired Standard |
IEEE 802.3i/3u/3ab |
802dot11 OUI: none specified | |
Stock bootloader |
U-Boot |
Expansion IF types |
none specified |
PoE |
802.3at, standard |
Power |
12 VDC, 1.25 A |
Serial Port (UART) |
yes, 3.3, 115200 / 8N1 |
Flags: Wi-Fi 6 | |
Other | |
| |
3rd Party Firmware Support | |
Radio 1 | |
Chip1 |
Qualcomm QCN5024 |
Wireless interface OUI |
none specified |
Antenna Connector Type |
none specified |
MIMO status |
2x2:2 |
Wireless Standard |
IEEE 802.11b/g/n/ax |
802.11ax |
up to 574 Mbps |
802.11n |
up to 300 Mbps |
802.11g |
up to 54 Mbps |
802.11b |
up to 11 Mbps |
WiFi Operating Frequency |
2.4 GHz |
Radio 2 | |
Chip1 |
Qualcomm QCN5054 |
Wireless interface OUI |
none specified |
Antenna Connector Type |
none specified |
MIMO status |
2x2:2 |
Wireless Standard |
IEEE 802.11a/n/ac/ax |
802.11ax |
up to 1201 Mbps |
802.11ac |
up to 867 Mbps |
802.11n |
up to 300 Mbps |
802.11a |
up to 54 Mbps |
WiFi Operating Frequency |
5 GHz |
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented Qualcomm chipsets with specifications, see Qualcomm.
For a list of all currently documented TP-LINK device with specifications, see TP-LINK.
Flashing
![]() | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
![]() | The development branch can contain experimental code that is under active development and should not be used for production environments. Snapshot images may support additional hardware; however, it is experimental, considered unstable, and sometimes won't compile. |
![]() | Prebuilt snapshot images do not come with any web interface or GUI. You will need to be comfortable using a command line and remote shell to install one yourself → How to install LuCI |
On the OpenWrt ToH (techdata entry)
OpenWrt Target: qualcommax
OpenWrt Subtarget: ipq807x
OpenWrt Package architecture: aarch64_cortex-a53
Support started version: ?
Current supported version: snapshot
OpenWrt Target: qualcommax
OpenWrt Subtarget: ipq807x
OpenWrt Package architecture: aarch64_cortex-a53
Support started version: ?
Current supported version: snapshot
Please insert instructions here
Categories:
- TP-LINK
- Embedded system/access point
- Embedded System Qualcomm
- Embedded System IPQ8072A
- Qualcomm
- Embedded System ARM
- Embedded System Cortex-A53
- Embedded System AR8031
- Embedded System Atheros
- Atheros
- OpenWrt Supported
- Embedded System QCN5024
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n/ax
- Embedded System QCN5054
- Embedded System IEEE 802.11a/n/ac/ax
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- Embedded System
- English Documentation