Database changes have finished applying - please report any issues you're (still) seeing to support@shoutwiki.com.

TP-LINK TL-WDR4300

From TechInfoDepot
Jump to navigationJump to search
multiple revisions of this device, use caution
abgn (AN750)
N750 Wireless Dual Band Gigabit Router
Homepage Product page
Wikipedia TP-Link
3rd Party Firmware
dd-wrt Supported
OpenWrt Supported
Tomato any flavor Incompatible
Gargoyle Status Unknown
Platform
BrandModelRev TP-LINK TL-WDR4300 v1.1
FCC ID TE7WDR4300
IC ID 8853A-WDR4300
Type wireless router
CPU1 checkY Atheros AR9344
CPU1 Type MIPS 74Kc
CPU1 Speed 560 MHz 32-bit
Flash1 Chip Spansion S25FL064KIF
Flash1 Size 8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br />
RAM1 Size 128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br />
RAM1 Chip SK hynix H5PS5162GFR x 2
ETH chip1 Atheros AR9344
Switch Atheros AR8327N
Ethernet Port Count 1-1GbE-WAN4-1GbE-LAN
Wired Standard IEEE 802.3i/3u/3ab

802dot11 OUI: C0:4A:00 (5 E, 5 W)
Ethernet OUI: C0:4A:00 (5 E, 5 W)

Stock bootloader U-Boot
Expansion IF types USB 2.0
USB ports 2
USB Hub Compatible Untested
Power 12 VDC, 1.56 A
Connector type barrel
5.5 mm (OD)
2.1 mm (ID)
9.5 mm (LEN)
Other

Default IP address: 192.168.0.1
the IP 192.168.0.1 is used by 817 additional devices
of which 107 are TP-LINK devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1347 additional devices
of which 282 are TP-LINK devices

3rd Party Firmware Support OpenWrt • (List | Dev | DLs)
, DD-WRT • (List)
Retail
Availability End of Life
End of Life date 2015
FCC approval date 06 June 2012
(Est.) release date 13 June 2012
UPC 845973051938
(UPC DB, On eBay)
ASIN B0088CJT4U Flag of the United States.svg
Country of manuf China
Radio 1
Chip1 Atheros AR9344
Wireless interface OUI C0:4A:00
Antenna Connector Type RP-SMA
MIMO status 2x2:2
Wireless Standard IEEE 802.11b/g/n
802.11n up to 300 Mbps
802.11g up to 54 Mbps
802.11b up to 11 Mbps
WiFi Operating Frequency 2.4 GHz
Radio 2
Chip1 Atheros AR9580
Wireless interface OUI C0:4A:00
Antenna Connector Type RP-SMA
MIMO status 3x3:3
Wireless Standard IEEE 802.11a/n
802.11n up to 450 Mbps
802.11a up to 54 Mbps
WiFi Operating Frequency 5 GHz
 CPU1 brandRadio1 chip1 brandRadio2 chip1 brand
TP-LINK TL-WDR4300AtherosAtherosAtheros
TP-LINK TL-WDR4300 v1 (IL)AtherosAtherosAtheros

For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.

For a list of all currently documented TP-LINK devices with specifications, see TP-LINK.

450 Mbps - 3SS 5GHz 802.11n (40MHz chan.),
300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = AN750 class

Overview

See also the TP-LINK TL-WDR4310 which shares the same hardware.

The Mercury MW4530R probably (on the OpenWrt Forums)
also shares the same hardware (minus a USB port).

"2050500224 Rev:1.0" is silkscreened on the board in the FCC photos.

A Genesys Logic GL850G USB 2.0 Hub controller is in use.

HW Versions

v1.7

  • RAM: Zentel A3R1GE40CBF
  • Flash: Winbond W25Q64FVSIG

v1.6

  • RAM: Winbond W975166KB
  • Flash: Winbond W25Q64FVSIG

PSU

Power supplies, as shown in the FCC photos, are...

  • US: Leader Electronics MU18-2120150-A1
(100-240VAC ~ 50/60Hz, 0.6A -> 12VDC, 1.5A)
  • Australia: Leader Electronics MU18-2120150-A3
(100-240VAC ~ 50/60Hz, 0.6A -> 12VDC, 1.5A)
  • UK: Leader Electronics MU18-2120150-B2
(100-240VAC ~ 50/60Hz, 0.6A -> 12VDC, 1.5A)
  • Euro: Leader Electronics MU18-2120150-C5
(100-240VAC ~ 50/60Hz, 0.6A -> 12VDC, 1.5A)

Links of Interest

"2050500231 Rev:1.0" is silkscreened on the board photo (v1.1).

Flashing

Flashing dd-wrt

Support started version: tl-wdr4300v1 build 19644 20120808
Current supported version: unknown

Please insert instructions here

Flashing OpenWrt

On the OpenWrt ToH (techdata entry)
On the OpenWrt Wiki
On the OpenWrt Forum
OpenWrt Target: ath79
OpenWrt Subtarget: generic
OpenWrt Package architecture: mips_24kc
Support started version: 14.07
Current supported version: 24.10.0
Comment:
v1.0, v1.1, v1.2, v1.3, v1.4, v1.5, v1.6, v1.7

Please insert instructions here

JTAG-Serial Info

JTAG

AR9344 Support two JTAG modes:

Plain JTAG and EJTAG for debugging.

To enable EJTAG mode you will need to remove

bootstrap resistor marked on this image:

If u-boot is not damaged and you won't to experiment with EJTAG,

then you will need to disable at least /CS pin of SPI chip.
You can see it on this picture too.

Pictures

Retail Images
User Images