TP-LINK TL-WR1041N v2
From TechInfoDepot
Jump to navigationJump to searchbgn (N300) | |
|---|---|
| wireless router | |
| Homepage |
Product page (CN) |
| Wikipedia | |
| 3rd Party Firmware | |
| dd-wrt | |
| OpenWrt | |
| Tomato any flavor |
Incompatible |
| Gargoyle |
Status Unknown |
| Platform | |
| Brand • Model • Rev |
TP-LINK TL-WR1041N v2 |
| FCC ID |
none specified |
| Type |
wireless router |
| CPU1 |
Atheros AR9342 |
| CPU1 Type |
MIPS 74Kc |
| CPU1 Speed |
525 MHz |
| Flash1 Chip |
Eon Q32B-104HIP |
| Flash1 Size |
4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> |
| RAM1 Size |
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> |
| RAM1 Chip |
Winbond W9425G6JH-5 |
| ETH chip1 |
Atheros AR9342 |
| Switch |
Atheros AR8327 |
| Ethernet Port Count |
1-WAN 4-1GbE-LAN |
| Wired Standard |
IEEE 802.3i/3u/3ab |
| Stock bootloader |
U-Boot |
| Expansion IF types |
none specified |
| Power |
9 VDC, 0.85 A |
| Connector type |
barrel |
| Other | |
|
Default IP address: 192.168.1.1 | |
| 3rd Party Firmware Support | |
| Retail | |
| Availability | End of Life |
| Radio 1 | |
| Chip1 |
Atheros AR9342 |
| Wireless interface OUI |
8C:21:0A |
| Antenna Connector Type |
none specified |
| MIMO status |
2x2:2 |
| Wireless Standard |
IEEE 802.11b/g/n |
| 802.11n |
up to 300 Mbps |
| 802.11g |
up to 54 Mbps |
| 802.11b |
up to 11 Mbps |
| WiFi Operating Frequency |
2.4 GHz |
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented TP-LINK device with specifications, see TP-LINK.
- • 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class
Overview
- "2050500215" and "Rev:1.0" is silkscreened on the board.
Links of Interest
Photos
Specifications noted on the OpenWrt forums
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
 | This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram. DO NOT BUY DEVICES WITH 4MB FLASH / 32MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 4/32 warning for details. |
| This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation. This means that even setting a password or changing simple network settings might not be possible any more, rendering the device effectively useless. See OpenWrt on 4/32 devices what you can do now. |
| OpenWrt support for this device has ended in 2022. 19.07.10 was the last official build for 4/32 devices. |
On the OpenWrt ToH (techdata entry)
On the OpenWrt Wiki
Support started version: 12.09
Current supported version: 18.06.9
On the OpenWrt Wiki
Support started version: 12.09
Current supported version: 18.06.9
Please insert instructions here
