TP-LINK TL-XDR4288 v1
From TechInfoDepot
Jump to navigationJump to search
| abgn+ac+ax (AX42002R) | |
|---|---|
| AX4200 Wireless router | |
|
| |
| Homepage | Product page |
| Wikipedia | TP-Link |
| WikiDevi.wi-cat.ru | TP-LINK TL-XDR4288 |
| 3rd Party Firmware | |
| dd-wrt | Status Unknown |
| OpenWrt | Supported |
| Tomato any flavor | Incompatible |
| Gargoyle | Status Unknown |
| Platform | |
| Brand • Model • Rev | TP-LINK TL-XDR4288 v1 |
| FCC ID | none specified |
| Type | wireless router |
| CPU1 | MediaTek MT7986AV |
| CPU1 Type | ARM Cortex-A53 |
| CPU1 Speed | 2.0 GHz ( 4 cores ) 64-bit |
| Flash1 Chip | ESMT F50L1G41LB-104 |
| Flash1 Size | 128 MiB 134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (NAND) |
| RAM1 Size | 512 MiB 536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> |
| RAM1 Chip | ESMT M15T4G16256A-EFB |
| ETH chip1 | MediaTek MT7986AV |
| ETH chip2 | Realtek RTL8221B |
| ETH chip3 | Realtek RTL8221B |
| Switch | MediaTek MT7531AE |
| Ethernet Port Count |
1-2.5GbE-WAN 1-2.5GbE x 4-1GbE-LAN |
| Wired Standard | IEEE 802.3i/3u/3ab/3bz |
|
802dot11 OUI: none specified | |
| Stock bootloader | U-Boot |
| Expansion IF types | USB 3.0 |
| USB ports | 1 |
| USB Hub Compatible | Untested |
| Power | 12 VDC, 2.5 A |
| Connector type | barrel |
| Serial Port (UART) | yes, 3.3V TTL, (115200 8N1) |
|
Flags: | |
|
| |
| Other | |
|
| |
| 3rd Party Firmware Support |
OpenWrt • (List | Dev | DLs) |
| Retail | |
| (Est.) release date | September 2022 |
| Radio 1 | |
| Chip1 | MediaTek MT7986AV |
| Chip2 | MediaTek MT7976DAN |
| Wireless interface OUI | none specified |
| Antenna Connector Type | none specified |
| MIMO status | 2x2:2 |
| Wireless Standard | IEEE 802.11b/g/n/ax |
| 802.11ax | up to 574 Mbps |
| 802.11n | up to 300 Mbps |
| 802.11g | up to 54 Mbps |
| 802.11b | up to 11 Mbps |
| WiFi Operating Frequency | 2.4 GHz |
| Radio 2 | |
| Chip1 | MediaTek MT7986AV |
| Chip2 | MediaTek MT7976DAN |
| Wireless interface OUI | none specified |
| Antenna Connector Type | none specified |
| MIMO status | 3x3:2 |
| Wireless Standard | IEEE 802.11a/n/ac/ax |
| AX-QAM | up to 3603 Mbps |
| 802.11ax | up to 1201 Mbps |
| 802.11ac | up to 867 Mbps |
| 802.11n | up to 300 Mbps |
| 802.11a | up to 54 Mbps |
| WiFi Operating Frequency | 5 GHz |
For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.
For a list of all currently documented Realtek chipsets with specifications, see Realtek.
For a list of all currently documented TP-LINK devices with specifications, see TP-LINK.
Overview
- TP-LINK TL-XDR4288 • CPU: MediaTek MT7986A, 4x @2.0GHz, 128/512MB
- WLAN: MediaTek MT7986A, MT7976DAN/VC5333-21, MT7976DAN/QPF4588
See also: TP-LINK TL-X series and TP-LINK Archer AX series
Links of Interest
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
Target: mediatek
Subtarget: filogic
Package architecture: aarch64_cortex-a53
Supported Since Commit
Support started version: 23.05.0
Current supported version: 25.12.2
Subtarget: filogic
Package architecture: aarch64_cortex-a53
Supported Since Commit
Support started version: 23.05.0
Current supported version: 25.12.2
LAN Hardware: MediaTek MT7531AE
LAN Comment: 2x Realtek RTL8221B 2.5Gbe Phy
WLAN Hardware: MediaTek MT7986AV, MediaTek MT7976DAN
WLAN Comment: MIMO: 2.4G 2x2:2, 5G 3x3:2
Installation method(s):
see git-commit
Recovery method(s):
see git-commit
LAN Comment: 2x Realtek RTL8221B 2.5Gbe Phy
WLAN Hardware: MediaTek MT7986AV, MediaTek MT7976DAN
WLAN Comment: MIMO: 2.4G 2x2:2, 5G 3x3:2
Installation method(s):
see git-commit
Recovery method(s):
see git-commit
| git • >> |
|---|
mediatek: add support for TP-Link TL-XDR4288/608x
Hardware specification:
SoC: MediaTek MT7986A 4x A53
Flash: ESMT F50L1G41LB 128MB
RAM: ESMT M15T4G16256A 512MB
Ethernet (Max Speed):
XDR4288: 1x 2.5G Wan, 1x 2.5G Lan, 4x 1G Lan
XDR6086: 1x 2.5G Wan, 1x 2.5G Lan, 1x 1G Lan
XDR6088: 1x 2.5G Wan, 1x 2.5G Lan, 4x 1G Lan
WiFi:
XDR4288: MT7976DAN (2.4G 2T2R, 5G 3T3R)
XDR6086/XDR6088:
WiFi1: MT7976GN 2.4GHz 4T4R
WiFi2: MT7976AN 5GHz 4T4R
Button: Reset, WPS, Turbo
USB: 1 x USB 3.0
Power: DC 12V 4A
Flash instructions:
1. Execute the following operation to open nc shell:
https://openwrt.org/inbox/toh/tp-link/xdr-6086#rooting
2. Replace the stock bootloader to OpenWrt's:
dd bs=131072 conv=sync of=/dev/mtdblock9 if=/tmp/xxx-preloader.bin
dd bs=131072 conv=sync of=/dev/mtdblock9 seek=28 if=/tmp/xxx-bl31-uboot.fip
3. Connect to your PC via the Gigabit port of the router,
set a static ip on the ethernet interface of your PC.
(ip 192.168.1.254, gateway 192.168.1.1)
4. Download the initramfs image, and restart the router,
waiting for tftp recovery to complete.
5. After openwrt boots up, perform sysupgrade.
|
Categories:
- TP-LINK
- Embedded system/wireless router
- Embedded System MediaTek
- Embedded System MT7986AV
- MediaTek
- Embedded System ARM
- Embedded System Cortex-A53
- Embedded System RTL8221B
- Embedded System Realtek
- Realtek
- Embedded System MT7531AE
- OpenWrt Supported
- Embedded System MT7976DAN
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n/ax
- Embedded System IEEE 802.11a/n/ac/ax
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- Embedded System
- English Documentation