TP-LINK TL-XDR6088

From TechInfoDepot
Jump to navigationJump to search
abgn+ac+ax (AX6000)
Gigabit Wireless Router AX6000
Homepage Product page
Wikipedia TP-Link
WikiDevi.wi-cat.ru TP-LINK TL-XDR6088
3rd Party Firmware
dd-wrt Status Unknown
OpenWrt Supported
Tomato any flavor Incompatible
Gargoyle Status Unknown
Platform
BrandModelRev TP-LINK TL-XDR6088 Turbo v1
FCC ID (fcc.io) none specified
FCC ID (fcc.report) none specified
Board ID 2050501942
Type wireless router
CPU1 checkY MediaTek MT7986AV
CPU1 Type ARM Cortex-A53
CPU1 Speed 2.0 GHz ( 4 cores ) 64-bit
Flash1 Chip ESMT F50L1G41LB-104
Flash1 Size 128 MiB 134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (NAND)
RAM1 Size 512 MiB 536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br />
RAM1 Chip ESMT M15T4G16256A-EFB
ETH chip1 MediaTek MT7986AV
ETH chip2 Realtek RTL8221B
ETH chip3 Realtek RTL8221B
Switch MediaTek MT7531AE
Ethernet Port Count 1-2.5GbE-WAN
1-2.5GbE x 4-1GbE-LAN
Wired Standard IEEE 802.3i/3u/3ab/3bz

802dot11 OUI: none specified

Stock bootloader U-Boot
Expansion IF types USB 3.0
USB ports 1
USB Hub Compatible Untested
Power 12 VDC, 4 A
Connector type barrel
Serial Port (UART) yes, 4-pin header, 3.3V TTL, (115200 8N1)

Flags:
Wi-Fi 6, heatsink

Other
Manuf/OEM/ODM TP-LINK
3rd Party Firmware Support OpenWrt • (List | Dev | DLs)
Retail
(Est.) release date June 2022
Country of manuf China
Radio 1
Chip1 MediaTek MT7986AV
Chip2 MediaTek MT7976GN
Wireless interface OUI none specified
Antenna Connector Type none specified
MIMO status 4x4:4
Wireless Standard IEEE 802.11b/g/n/ax
802.11ax up to 1148 Mbps
802.11n up to 600 Mbps
802.11a up to 54 Mbps
WiFi Operating Frequency 2.4 GHz
Radio 2
Chip1 MediaTek MT7986AV
Chip2 MediaTek MT7976AN
Wireless interface OUI none specified
Antenna Connector Type none specified
MIMO status 4x4:4
Wireless Standard IEEE 802.11a/n/ac/ax
AX-QAM up to 4804 Mbps
802.11ax up to 2402 Mbps
802.11ac up to 1833 Mbps
802.11n up to 600 Mbps
802.11a up to 54 Mbps
WiFi Operating Frequency 5 GHz

For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.
For a list of all currently documented Realtek chipsets with specifications, see Realtek.

For a list of all currently documented TP-LINK devices with specifications, see TP-LINK.

4804 Mbps - 4SS 5GHz 802.11ax (160MHz chan., 1024-QAM),
1148 Mbps - 4SS 2.4GHz 802.11ax (40MHz chan., 1024-QAM) = AX6000 class

Overview

WLAN: MediaTek MT7986A, MT7976GN/VC5333-21, MT7976AN/QPF4588

Links of Interest

Flashing

Flashing OpenWrt

Target: mediatek
Subtarget: filogic
Package architecture: aarch64_cortex-a53
Supported Since Commit
Support started version: 23.05.0
Current supported version: 25.12.2
LAN Hardware: MediaTek MT7531AE
LAN Comment: 2x Realtek RTL8221B 2.5Gbe Phy
WLAN Hardware: MediaTek MT7986AV, MediaTek MT7976GN, MediaTek MT7976AN
WLAN Comment: MIMO 4x4:4 on both bands
Installation method(s):
see git-commit
Recovery method(s):
see git-commit
git • >>
mediatek: add support for TP-Link TL-XDR4288/608x
Hardware specification:
  SoC: MediaTek MT7986A 4x A53
  Flash: ESMT F50L1G41LB 128MB
  RAM: ESMT M15T4G16256A 512MB
  Ethernet (Max Speed):
    XDR4288: 1x 2.5G Wan, 1x 2.5G Lan, 4x 1G Lan
    XDR6086: 1x 2.5G Wan, 1x 2.5G Lan, 1x 1G Lan
    XDR6088: 1x 2.5G Wan, 1x 2.5G Lan, 4x 1G Lan
  WiFi:
    XDR4288: MT7976DAN (2.4G 2T2R, 5G 3T3R)
    XDR6086/XDR6088:
      WiFi1: MT7976GN 2.4GHz 4T4R
      WiFi2: MT7976AN 5GHz 4T4R
  Button: Reset, WPS, Turbo
  USB: 1 x USB 3.0
  Power: DC 12V 4A

Flash instructions:
  1. Execute the following operation to open nc shell:
     https://openwrt.org/inbox/toh/tp-link/xdr-6086#rooting
  2. Replace the stock bootloader to OpenWrt's:
     dd bs=131072 conv=sync of=/dev/mtdblock9 if=/tmp/xxx-preloader.bin
     dd bs=131072 conv=sync of=/dev/mtdblock9 seek=28 if=/tmp/xxx-bl31-uboot.fip
  3. Connect to your PC via the Gigabit port of the router,
     set a static ip on the ethernet interface of your PC.
     (ip 192.168.1.254, gateway 192.168.1.1)
  4. Download the initramfs image, and restart the router,
     waiting for tftp recovery to complete.
  5. After openwrt boots up, perform sysupgrade.