TP-LINK EAP225 v1.x

From TechInfoDepot
(Redirected from TP-Link EAP225 v1)
Jump to navigationJump to search
multiple revisions of this device, use caution
abgn+ac (AC1200)
AC1200 Wireless Dual Band Gigabit Ceiling Mount Access Point
EAP110-01.jpg
Homepage Product page
Support Support page
Wikipedia TP-Link
WikiDevi.wi-cat.ru TP-LINK EAP225 v1.x
3rd Party Firmware
dd-wrt Status Unknown
OpenWrt Supported
Tomato any flavor Incompatible
Gargoyle Status Unknown
Platform
BrandModelRev TP-LINK EAP225 v1.x
FCC ID TE7EAP225
IC ID 8853A-EAP225
Type access point
CPU1 checkY Qualcomm Atheros QCA9563
CPU1 Type MIPS 74Kc
CPU1 Speed 750 MHz
Flash1 Chip GigaDevice Model?
Flash1 Size 16 MiB 16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (SPI NOR)
RAM1 Size 128 MiB 134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (DDR2)
RAM1 Chip ESMT M14D1G1664A-2.5B
ETH chip1 Qualcomm Atheros QCA9563
ETH chip2 Atheros AR8033
Ethernet Port Count 1-1GbE-LAN
Wired Standard IEEE 802.3i/3u/3ab

802dot11 OUI: none specified

Expansion IF types none specified
PoE 802.3af, standard
Power 12 VDC, 1.5 A
Connector type barrel
Serial Port (UART) yes, 4-pin header, J3, 3.3V TTL, (115200 8N1)

Additional chips
2.4GHz Power Amplifier IC;Skyworks;SE2565T;;2;
5GHz Front End Module;Skyworks;SKY85717-21;;2;

Other

Default login user: admin
Default login password: admin
admin:admin credentials used by 1347 additional devices
of which 282 are TP-LINK devices

Manuf/OEM/ODM Proware
3rd Party Firmware Support OpenWrt • (List | Dev | DLs)
Retail
Availability End of Life
FCC approval date 24 September 2016
ASIN B01N0XZ1TU Flag of the United States.svg
multiple uses
Radio 1
Chip1 Qualcomm Atheros QCA9563
Wireless interface OUI none specified
Antenna Connector Type U.FL
MIMO status 2x2:2
Wireless Standard IEEE 802.11b/g/n
802.11n up to 300 Mbps
802.11g up to 54 Mbps
802.11b up to 11 Mbps
WiFi Operating Frequency 2.4 GHz
Radio 2
Chip1 Qualcomm Atheros QCA9882
Wireless interface OUI none specified
Antenna Connector Type U.FL
MIMO status 2x2:2
Wireless Standard IEEE 802.11a/n/ac
802.11ac up to 867 Mbps
802.11n up to 300 Mbps
802.11a up to 54 Mbps
WiFi Operating Frequency 5 GHz
 FCC ID
TP-LINK EAP225 v2.xTE7EAP225
 CPU1 brandRadio1 chip1 brandRadio2 chip1 brand
TP-LINK EAP225 v1.xQualcomm AtherosQualcomm AtherosQualcomm Atheros
TP-LINK EAP225 v2.xQualcomm AtherosQualcomm AtherosQualcomm Atheros
TP-LINK EAP225 v3.xQualcomm AtherosQualcomm AtherosQualcomm Atheros
TP-LINK EAP225 v4.xQualcomm AtherosQualcomm AtherosQualcomm Atheros
TP-LINK EAP225 v5.xMediaTekMediaTekMediaTek
TP-LINK EAP225-OutdoorQualcomm AtherosQualcomm AtherosQualcomm Atheros
TP-LINK EAP225-Outdoor v3Qualcomm AtherosQualcomm AtherosQualcomm Atheros
TP-LINK EAP225-Wall v2Qualcomm AtherosQualcomm AtherosQualcomm Atheros

For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented Qualcomm Atheros (QCA) chipsets with specifications, see Qualcomm Atheros.

For a list of all currently documented TP-LINK devices with specifications, see TP-LINK.

867 Mbps - 2SS 5GHz 802.11ac (80MHz chan.),
300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = AC1200 class

Overview

"1604272225-1.0 Rev1.0sp2" is silkscreened on the board in the FCC photos.

Missing components prevent the QCA9563 from using all three spatial streams.

Links of Interest

Reviews

Says that the 5GHz radio is a QCA9982 which would be 3x3:3
Says that the 5GHz radio is a QCA9882 which would be 2x2:2 which makes more sense

Flashing

Flashing OpenWrt

On the OpenWrt ToH (techdata entry)
On the OpenWrt Wiki
On the OpenWrt Forum
OpenWrt Target: ath79
OpenWrt Subtarget: generic
OpenWrt Package architecture: mips_24kc
Support started version: 21.02.0
Current supported version: 24.10.3
LAN Comment:
Atheros AR8033 GbE Phy
WLAN Comment:
2.4Ghz 2x2:2 MIMO, 5Ghz 2x2:2 MIMO

Please insert instructions here

Pictures

Retail Images

See also