TP-LINK TL-WR941HP v1.x
bgn (N450) | |
---|---|
450Mbps High Power Wireless N Router | |
![]() | |
Homepage | |
Wikipedia | |
WikiDevi.wi-cat.ru | |
3rd Party Firmware | |
dd-wrt |
Status Unknown |
OpenWrt | |
Tomato any flavor |
Incompatible |
Gargoyle |
Status Unknown |
Platform | |
Brand • Model • Rev |
TP-LINK TL-WR941HP v1.x |
FCC ID | |
Type |
wireless router |
Series |
TL-WR94 |
CPU1 ![]() |
Qualcomm Atheros TP9343 |
CPU1 Type |
MIPS 74Kc |
CPU1 Speed |
750 MHz |
Flash1 Chip |
GigaDevice GD25Q64CSIG |
Flash1 Size |
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> |
RAM1 Size |
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> |
RAM1 Chip |
ESMT M14D5121632A-2.5B |
ETH chip1 |
Qualcomm Atheros TP9343 |
Switch |
Qualcomm Atheros TP9343 |
Ethernet Port Count |
1-100MbE-WAN 4-100MbE-LAN |
Wired Standard |
IEEE 802.3i/3u |
Stock bootloader |
U-Boot |
Expansion IF types |
none specified |
Power |
12 VDC, 1.5 A |
Connector type |
barrel |
Serial Port (UART) |
yes, 4-pin header |
Flags: high power | |
Additional chips | |
Other | |
Default IP address: 192.168.0.1 | |
Manuf/OEM/ODM | |
3rd Party Firmware Support | |
Retail | |
Availability | End of Life |
FCC approval date | 05 May 2016 |
Country of manuf | China |
Radio 1 | |
Chip1 |
Qualcomm Atheros TP9343 |
Wireless interface OUI |
00:14:78 |
Antenna Connector Type |
RP-SMA |
MIMO status |
3x3:3 |
Wireless Standard |
IEEE 802.11b/g/n |
802.11n |
up to 450 Mbps |
802.11g |
up to 54 Mbps |
802.11b |
up to 11 Mbps |
WiFi Operating Frequency |
2.4 GHz |
For a list of all currently documented Qualcomm Atheros (QCA) chipsets with specifications, see Qualcomm Atheros.
For a list of all currently documented TP-LINK device with specifications, see TP-LINK.
- • 450 Mbps - 3SS 2.4GHz 802.11n (40MHz chan.) = N450 class
Overview
The TL-WR941HP uses 3x high power amplifiers and 3x 9dBi high gain antennas.
"1511042941-1.0 Rev:1.0sp2" is silkscreened on the board in the FCC photos.
Flashing
![]() | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
![]() | This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram.
DO NOT BUY DEVICES WITH 8MB FLASH / 64MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 8/64 warning for details. This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation. This means that you will not be able to install many packages, and that you might experience crashes due to OOM situations more or less often. See OpenWrt on 8/64 devices what you can do now. |
OpenWrt Target: ath79
OpenWrt Subtarget: generic
OpenWrt Package architecture: mips_24kc
Support started version: 22.03.0
Current supported version: 24.10.0
Please insert instructions here
Pictures
See also
- TP-LINK TL-WR841HP • FCC ID: TE7WR841HPV1
- N300 Wireless Wi-Fi Fast Ethernet Router
- TP-LINK
- Embedded system/wireless router
- Embedded System Qualcomm Atheros
- Embedded System TP9343
- Qualcomm Atheros
- Embedded System MIPS 74Kc
- Embedded System
- Manuf Proware
- OpenWrt Supported
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- English Documentation