TRENDnet TEW-651BR V2.xR/Serial info
From TechInfoDepot
Jump to navigationJump to searchBoot log
Booting... ========== SPI ============= ---RealTek(RTL8196C)at 2010.11.15-16:43+0800 version v1.1f [16bit](390MHz) no sys signature at 00010000! no sys signature at 00020000! no sys signature at 00030000! no rootfs signature at 000E0000! no rootfs signature at 000F0000! no rootfs signature at 00130000! no rootfs signature at 00100000! no rootfs signature at 00110000! Jump to image start=0x80500000... decompressing kernel: Uncompressing Linux... done, booting the kernel. done decompressing kernel. start address: 0x800034c0 RTL8192C/RTL8188C driver version 1.4 (2010-08-11) init started: BusyBox v1.13.4 (2010-11-09 16:26:59 CST) # [ 41 ncc_runtimecfg.c : 274 initRunTimeCfg()]:::Init Run-Time Config S uccess. [ 41 ncc_runtimecfg.c : 275 initRunTimeCfg()]:::Total 645 nodes, each no de 24 bytes. [ 41 ncc_runtimecfg.c : 276 initRunTimeCfg()]:::Total 15480 byte for all nodes. [ 41 ncc_runtimecfg.c : 277 initRunTimeCfg()]:::Total 11346 byte for dat a. [ 41 ncc_runtimecfg.c : 279 initRunTimeCfg()]:::Ncc pid is 41. [ 41 ncc_runtimecfg.c : 72 loadCfg()]:::Start loadCfg [ 41 ncc_lz77.c : 525 flash2rootfs()]:::Load Success(/var/tmp/cf g.txt) [ 41 ncc_inf.c : 230 ncc_inf_main()]:::ncc_inf_main pid is 41. [ 41 leobox_network.c : 983 socket_select()]:::Enter pid=41,ppid=1 [ 46 leobox_network.c : 746 socket_select_hdlr()]:::create new process pid =46,ppid=45 socket: Address family not supported by protocol [ 51 ncc_main.c : 33 sendBootEvent()]:::pid = 51 mini_httpd: started as root without requesting chroot(), warning only [ 41 ncc_fsm_boot.c : 309 TEW_651BR_Boot()]:::Before Lan Start!! [ 41 ncc_snmpd.c : 172 snmpdOp()]:::st is null. killall: lld2d: no process killed [ 41 ncc_fsm_boot.c : 315 TEW_651BR_Boot()]:::After Lan Start!! Mon Feb 27 09:18:02 UTC 2012 [ 41 ncc_fsm_boot.c : 324 TEW_651BR_Boot()]:::Before syslogd Start!! [ 41 ncc_fsm_boot.c : 328 TEW_651BR_Boot()]:::After syslogd Start!! WiFi Simple Config v1.19 (2010.08.20-16:42+0000). killall: crond: no process killed
