TRENDnet TEW-732BR
bgn (N300) | |
---|---|
N300 Wireless Router | |
3rd Party Firmware | |
dd-wrt | Status Unknown |
OpenWrt | Was Supported |
Tomato any flavor | Incompatible |
Gargoyle | Status Unknown |
Platform | |
Brand • Model • Rev | TRENDnet TEW-732BR V1.0R |
FCC ID | XU8TEW732BR |
Type | wireless router |
CPU1 ![]() | Atheros AR1321 |
CPU1 Type | MIPS 74Kc |
CPU1 Speed | 535 MHz |
Flash1 Chip | GigaDevice 25Q64BSIG |
Flash1 Size | 8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> |
RAM1 Size | 64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> |
RAM1 Chip | Nanya NT5TU32M16DG-AC |
ETH chip1 | Atheros AR1321 |
Switch | Atheros AR1321 |
Ethernet Port Count |
1-100MbE-WAN 4-100MbE-LAN |
Wired Standard | IEEE 802.3i/3u |
802.1q vlan | Yes |
Stock bootloader | U-Boot |
Expansion IF types | none specified |
Power | 5 VDC, 1 A |
Connector type | barrel |
Serial Port (UART) | yes, 4-pin header |
JTAG Port | yes, 14-pin header, unpopulated |
| |
| |
Other | |
Default SSID: TRENDnet732-XXXX | |
Manuf/OEM/ODM | Cameo |
3rd Party Firmware Support |
OpenWrt (Was) |
Retail | |
Availability | End of Life |
End of Life date | 2016 |
FCC approval date | 27 February 2013 |
UPC |
710931130089 (UPC DB, On eBay) |
ASIN |
B00E37JFH0 ![]() |
Country of manuf | China |
Radio 1 | |
Chip1 | Atheros AR1321 |
Wireless interface OUI | D8:EB:97 |
Antenna Connector Type | U.FL |
MIMO status | 2x2:2 |
Wireless Standard | IEEE 802.11b/g/n |
802.11n | up to 300 Mbps |
802.11g | up to 54 Mbps |
802.11b | up to 11 Mbps |
WiFi Operating Frequency | 2.4 GHz |
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented TRENDnet devices with specifications, see TRENDnet.
- • 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class
Overview
This router sits upright like the ZyXEL NBG5715.
"Rev:A0-2" and "Made In China" is silkscreened on the board in the FCC photos.
The WiSoC used is an AR1321-AL1A.
Default settings are per the FCC manual. The XXXX in the default SSID pattern appears to be lower-case hex digits.
- The FCC label, however, specifies the default SSID pattern as TRENDnet732XXXX.
(The board contain a 4-pin UART (serial) output, as well as a 14-pin output (possibly for JTAG?).
Headers are unpopulated, need to be soldered. Board also has silkscreen and holes for one USB)
Flashing
![]() | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
![]() | This device is NO LONGER SUPPORTED OR POSSIBLE for future use with OpenWrt. |
On the OpenWrt Wiki
OpenWrt Target: ar71xx
OpenWrt Subtarget: generic
OpenWrt Package architecture: mips_24kc
Support started version: 14.07
Current supported version: EOL
Last Supported Version: 19.07.10
Please insert instructions here
- TRENDnet
- Embedded system/wireless router
- Embedded System Atheros
- Embedded System AR1321
- Atheros
- Embedded System MIPS 74Kc
- Embedded System
- Manuf Cameo
- OpenWrt Was Supported
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- Single-Band
- English Documentation