TRENDnet TEW-735AP

From TechInfoDepot
Jump to navigationJump to search
bgn (N300)
N300 High Power PoE Access Point
TEW 735AP d01 2.png
Homepage Product page
WikiDevi.wi-cat.ru TRENDnet TEW-735AP
3rd Party Firmware
dd-wrt Status Unknown
OpenWrt Status Unknown
Tomato any flavor Incompatible
Platform
BrandModelRev TRENDnet TEW-735AP V1.0R
FCC ID (fcc.io) XU8TEW735AP
FCC ID (fcc.report) XU8TEW735AP
Type access point
CPU1 checkY Realtek RTL8196C
CPU1 Type Lexra RLX4181
CPU1 Speed 390 MHz
Flash1 Chip Macronix Model?
Flash1 Size ? MiB
RAM1 Size ? MiB
RAM1 Chip Brand? Model?
ETH chip1 Realtek RTL8196C
Ethernet Port Count 1-100MbE-LAN
Wired Standard IEEE 802.3i/3u

802dot11 OUI: none specified

Expansion IF types none specified
PoE 802.3af, standard
Power 12 VDC, 1 A
Connector type barrel
Serial Port (UART) yes, 3.3V TTL

Additional chips
2.4GHz Power Amplifier IC;RFMD;RF5602;RF, 5602, BW4D;2;

Other

Default SSID: TRENDnet735_2.4GHz_XXXX
Default IP address: 192.168.10.100
the IP 192.168.10.100 is used by 13 additional devices
of which 13 are TRENDnet devices
Default login user: admin
Default login password: randomly generated
admin:randomly generated credentials used by 28 additional devices
of which 11 are TRENDnet devices

Manuf/OEM/ODM Senao
Retail
Availability End of Life
FCC approval date 13 September 2013
Country of manuf Taiwan
Radio 1
Chip1 Realtek RTL8192CE
Wireless interface OUI none specified
Antenna Connector Type U.FL
MIMO status 2x2:2
Wireless Standard IEEE 802.11b/g/n
802.11n up to 300 Mbps
802.11g up to 54 Mbps
802.11b up to 11 Mbps
WiFi Operating Frequency 2.4 GHz

For a list of all currently documented Realtek chipsets with specifications, see Realtek.

For a list of all currently documented TRENDnet devices with specifications, see TRENDnet.

300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class

Overview

"7016A0510008" and "V-1.00" is silkscreened on the board in the FCC photos. The same text is found on the boards of the EnGenius EAP300 and EnGenius EAP150.

The Wi-Fi radio is using two RFMD RF5602 power amplifier ICs.

Default settings are per the FCC manual. They may not be 100% accurate.

The power adapter shown in the FCC external photos is a DVE DSA-12G-12 FUS 120120 (100-240VAC ~ 50/60Hz, 0.3A -> 12VDC, 1A).