TRENDnet TEW-753DAP
| abgn (AN600) | |
|---|---|
| N600 High Power Dual Band PoE Access Point | |
| 3rd Party Firmware | |
| dd-wrt | Status Unknown |
| OpenWrt | Status Unknown |
| Tomato any flavor | Incompatible |
| Platform | |
| Brand • Model • Rev | TRENDnet TEW-753DAP |
| FCC ID (fcc.io) | XU8TEW753DAP |
| FCC ID (fcc.report) | XU8TEW753DAP |
| Type | access point |
| CPU1 | Atheros AR9344 |
| CPU1 Type | MIPS 74Kc |
| CPU1 Speed | 560 MHz 32-bit |
| Flash1 Chip | Macronix MX25L12845EMI-10G |
| Flash1 Size | 16 MiB 16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> |
| RAM1 Size | 128 MiB 134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> |
| RAM1 Chip | Nanya NT5TU32M16DG-AC |
| ETH chip1 | Atheros AR9344 |
| ETH chip2 | Atheros AR8035-A |
| Ethernet Port Count | 1-1GbE-LAN |
| Wired Standard | IEEE 802.3i/3u/3ab |
|
802dot11 OUI: none specified | |
| Expansion IF types | none specified |
| PoE | 802.3af, standard |
| Power | 12 VDC, 1.5 A |
| Connector type | barrel |
| Serial Port (UART) | yes, 3.3V TTL |
|
| |
|
Additional chips | |
| Other | |
|
Default SSID: TRENDnet753_2.4GHz_XXXX | |
| Manuf/OEM/ODM | Senao |
| Retail | |
| FCC approval date | 13 September 2013 |
| Country of manuf | Taiwan |
| Radio 1 | |
| Chip1 | Atheros AR9344 |
| Wireless interface OUI | none specified |
| Antenna Connector Type | U.FL |
| MIMO status | 2x2:2 |
| Wireless Standard | IEEE 802.11a/n |
| 802.11n | up to 300 Mbps |
| 802.11a | up to 54 Mbps |
| WiFi Operating Frequency | 5 GHz |
| Radio 2 | |
| Chip1 | Atheros AR9382 |
| Wireless interface OUI | none specified |
| Antenna Connector Type | U.FL |
| MIMO status | 2x2:2 |
| Wireless Standard | IEEE 802.11b/g/n |
| 802.11n | up to 300 Mbps |
| 802.11g | up to 54 Mbps |
| 802.11b | up to 11 Mbps |
| WiFi Operating Frequency | 2.4 GHz |
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented TRENDnet devices with specifications, see TRENDnet.
Overview
"7016A0507001 Ver: 1.00" is silkscreened on the board in the FCC photos. This is the same text found on the Senao CAP4200AG and derivative models.
- The 2.4GHz radio (AR9382-AL1) is using two Microchip (SST) SST12LP15A power amplifier ICs (marked "SST", "12LP15A", "152ASM").
- The 5GHz radio (AR9344-BC2A) is using two Skyworks (SiGe) SE2537L / 2537L power amplifier ICs.
The Flash chip appears to be a MX25L12845EMI-10G (16 MB).
The power adapter in the FCC photos is a Powertron ELectronics Corp. PA1015-2I (100-240VAC ~ 50-60Hz, 0.4A -> 12VDC, 1.25A).
- TRENDnet
- Embedded system/access point
- Embedded System Atheros
- Embedded System AR9344
- Atheros
- Embedded System MIPS 74Kc
- Embedded System
- Embedded System AR8035-A
- Manuf Senao
- Has Mimo Status
- Embedded System IEEE 802.11a/n
- Embedded System AR9382
- Embedded System IEEE 802.11b/g/n
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- English Documentation