TechInfoDepot:Tomato/Shibby/change log

[RELEASE] 109

• Webmon Backup Script – look Administration -> Logging
• Busybox: Fix tune2fs and revert e2label tool
• EtherState: cosmetics changes – looks better
• Ethernet State: fix when WAN is tagged – thx @Victek
• Allow WNR3500Lv2 to upgrade from Web interface
• Openssl: enable s_client
• rp-pppoe: upgrade to 3.11
• Dnsmasq upgrade to 2.67test3 – thx @Kevin
• Added refresh timer to tools/system page – thx @Toastman
• Add Time 0:01 and 23:59 to Scheduler
• Backported new exportfs method (365-exportfs1 patch from WL500g) – thx @RMerlin
• Extended MOTD with GUI – written by @Monter, modified by @Shibby – can be disabled in GUI Administration -> Admin Access -> SSH
• IPTraffic bugfix – thx @RMerlin
• StealthMode v0.5 – Sunset – thx @Monter – please run stealthMode via SSH/telcon for more information
• Fix for dhcpv6 with prefix delegation – thx @Toastman
• Remove radvd & libdaemon, use dnsmasq for IPv6 RA instead – thx @Kevin
• Added ipset support – thx @RMerlin
• Implement multithreaded kernel building to speed up firmware compile time – thx @RMerlin
• Do not write out ‚no-dhcp-interface’ in dnsmasq.conf as is superfluousas no dhcp-range has been set – thx @Kevin

[RELEASE] 108

• Fix vsftpd rights
• Fix upnp GUI
• Miniupnpd: fix permissions to use dotted mask. Return to dotted mask in config file.
• Further optimize lzo compilation to help OpenVPN performance and This optimization gives us a 10% speed gain (thx RMerlin)
• Miniupnpd: add custom configuration textarea to GUI
• Fix reboot/logout/shutdown buttons from nas-ups page.
• Make some images smaller
• Add ebtables to all mini K26 builds.
• HTTPS remote access should now works on builds without VPN included (libssl problem)
• Fix default vlans for RG200E-CA

[RELEASE] 107

• Preliminary ChinaNet RG200E-CA support (RT-N branch, only for routers with changed CFE)
• StealthMode v0.3 (fixed turn on/off leds on RT-N16, add „leds guardian” to cru) (thx Monter)
• Gives another nice performance boost, for less than 100KB tradeoff after LZMA compression ( thx RMerlin)
• Ntfs-3g release 2013.1.13
• Increase TC_HTB_NUMPRIO to 10 (thx Toastman)
• Improvement in the appearance of the qos-classify ( thx Monter)
• Preliminary FiberHome HG320 ID/support (RT-N branch)
• Preliminary Catchtech CW-5358U ID/support ( RT-N branch)
• Add new miniVPN buildtype for router with 4MB flash
• Dnsmasq: update to 2.66TEST16 ( thx Kevin)
• Make remote HTTPS more secure ( use RSA 2048 key, use router name as CN)
• Miniupnpd: fix SIGUSR2 problem

• fix showing opened ports in GUI
• lanmask has to be present as bits

• Transmission: update to 2.77
• Busybox: revert dhcpc from BB 1.18.4 for now

• Works release/renew
• Remaining Lease Time is showing correct

• TTB: we need unzip tool
• Fix for excessive VPN logging „vpn server already running”
• 3G Modem: fix switch3g script
• Ethernet State: cosmetics changes

[RELEASE] 106

• Busybox: full update to 1.20.2
• Miniupnpd: update to 1.8 (20130207)
• Stealthmode scripts for RT-N16 and RT-N66u only. Usage: /usr/sbin/stealthMode on|off
• Grow up static dhcp entries from 140 to 250
• Libevent: update to 2.0.21
• robocfg update for new Ethernet ports state feature
• Ethernet State Report with GUI
• Fix OpenVPN depends in K24 builds

Note:

• Robocfg is not perfect and it`s not fully support all routers with Tomato. On some gigabits routers, 1Gbit connections can be displayed as 10M. It`s a robocfg fault. You can disable speed info from GUI.
• if ethernet ports are displayed in wrong order, you can enable „invert ports order” options.
• if some of you don`t like Ethernet ports state, you can disable this feature in GUI.

[HOTFIX] 105.1

If some of you still have a problem with long boot time on Asus RT-N16 + v105 please try 105.1:

http://tomato.groov.pl/download/K26/testing/

Jeżeli ktoś z was wciąż boryka się z problemem długiego startu na routerze Asus RT-N16 +v105 proszę spróbować poprawionej wersji 105.1:

http://tomato.groov.pl/download/K26/testing/

Best Regards / Pozdrawiam

[RELEASE] 105

http://tomato.groov.pl/download/

• Add TC-ATM overhead calculation for DSL – thx Tvlz
• Revised QOS classification rules – thx Toastman
• new L7 filter pattern for youtube – - thx Porter
• Switchable QOS Pie Chart – thx Dinnn
• OpenSSL update to 1.0.1c and:

• enable OpenSSL assembler acceleration
• enable 2 new openssl commands: version and speed

• OpenVPN update to 2.3.0 (ipv6 support)
• LZO update to 2.0.6
• Transmission: update to 2.76
• Re-enable TCP Vegas settings
• Add IMQ based QOS ingress, incoming bandwidth pie chart – thx Tiomo
• Column sorting fixes – thx Tony550
• Add previous WAN IP to status overview – thx Victek
• Correcting grammar errors – Big thanks for GhaladReam
• Fix VLAN mapping ports for RT-N10U
• Make some build smaller
• TomatoAnon: generate a random clock (minutes) for interval update.
• TTB: project integration and GUI
• Fix long boot time on Asus RT-N16
• xl2tpd: update to 1.3.1 + patches. Fix L2TP connections. Tested on Beeline-Russia by user @DollaR
• Allow to redirect remote access ports (SSH & HTTP(s) ) to router if DMZ is enabled. Checkout new option in forward-dmz page.
• TOR: update to 2.3.25

[RELEASE] 104

• Revised/recompiled BCM driver K26RT-N backported from Asus GPL 3.0.0.4.220
• Support 2nd radio (5GHz) using wl_high module for router Asus RT-N53, Linksys E2500 and E3200
• VLAN mapping for Asus RT-N53
• include TomatoAnon project (disabled by default)
• revert (fully integrade tomato-RT branch with my branch (lot of teddy`s updates from april to august 2011) and add only some of commits like

• rc: fix for E4200 mac address
• BCM SDK: dirty dd-wrt fix for Belkin f7d4302 5GHz radio
• USB: LED driver: support multiple devices
• Build: fpkg: fix creating Belkin images

[RELEASE] 102

• Add fully support for 3G modem ZTE MF195 (ttyACM0 device)
• Transmission: update to 2.71
• Remove limitation about 22 bits netmask
• SD card support only for RT-N66u (save space)
• Add support for Asus WL-330gE
• Add support for Huawei E3131s-2 (module and usb_modeswitch data only)
• Remove some extra themes from TOR-VPN builds (save space, image was too big for Netgear 3500L v1)
• Compile/include mdadm tool only if RAID is set (save space)
• Fix a bug in the Asus/Linksys Red Themes
• NTFS-3G update fo 2012.1.15
• fully integrade tomato-RT branch with my branch (lot of teddy`s updates from april to august 2011

[RELEASE] 101

• IPv6 suppord fixed (sit.ko module depends)
• Transmission fixed (libiconv depends issue)
• RAID 0/1 support. Modules and mdadm tool available in extras. Mega-VPN and AIO have RAID modules and tool build-in
• radvd update to 1.9.1 + libdaemon
• Memory leak fixed (when IPv6 is enabled)
• L2TP WAN connection fixed
• VLAN mapping for Belkin routers
• miniDLNA update to 1.0.25
• AsusRed and LinksysRed themes bu @Nitro 2nd edition
• Linksys E2500 Power LED fixed
• Images for Belkin routers (K26)

[RELEASE] 100

• Fix dnscrypt-proxy
• Fix GPT support for hard disks
• IPv6: Proof-of-Concept 6RD support
• Move all IPSec modules to extras/ipsec/ directory
• Two new themes by Nitro

[RELEASE] 099

• Fix virtual wireless (MultiSSID)
• Transmission: update to 2.61
• IPP2P: update to 0.99.16
• DNScrypt-proxy: update to 1.0
• DDNS: fix HE.net Tunnel Broker messages
• Add directory /tftpboot to root tree
• Add e2label (TUNE2FS) tool to USBEXTRAS
• Added IPSec support. All needed modules you can find in extras package. Builds Mega-VPN and AIO have build-in all needed modules. Please use strongswan from entware!
• Increase countdown after reboot router
• Add ZTE MF195 3G modem support (ZTE MF192 variant x T-Mobile/EE UK)
• TOR: Grow up data dir field

[RELEASE] 097

• Add PPTP VPN client runtime and GUI
• Fix OpenVPN settings page when using username authentication
• Fix overidden mac address not being saved.
• Add configuration options for the WAN ICMP Rate limiting
• Total/Free NVRAM on overview page
• TOR: Integration and GUI
• New „Max” builtype for router with 8MB flash and w/o USB support
• Driver for CH341 USB-serial adapter available in extras
• Transmission: update to 2.60
• Add support for RT-N66 (ONLY) 64K nvram (Upgrading from a 32K nvram firmware will wipeout all your data.)

[RELEASE] 095

• fix working PS3 with minidlna
• fix [bwlimit] link on overview-devices page
• fix „ug” bug with running shell scripts on RT-N66u
• remove garbage from Router Name
• enable USB Support by default
• enable SD Card support for RT-N66u by default
• samba security fix – „root” credential remote code execution
• wl_mitigation disabled by default
• VLAN:

• experimental VLAN/VID mapping GUI (allows creating VLANs with 802.1Q tags larger than 15 via GUI)
• allow DMZ-style forwarding to alternative LAN bridges

• PPTP:

• allow specify ‚custom’ config/settings
• dnsmasq to answer DNS queries on pppX interfaces

• MultiSSID: some minor fixes

[RELEASE] 093

• Busybox:

• add WHOIS tool
• fix ash repetear bug

• Dropbear: 2012.55 update
• Dnsmasq: 2.61 update
• Captive Portal: lot of fixes and improvements

• new style of splash.html
• selectable interface (br0/1/2/3)
• fixed PATH in shell files (Thx for @baranek from openlinksys.info)
• some of patched from dd-wrt
• add to autostart

• Add SNMP configuration options for custom port and remote access
• Remove „CPU % usage” on Status Overview page
• Transmission: update 2.52
• New theme for „Dark Knight” RT-N66U ( by Dark_Shadow)
• Fix menu highlights (Captive Portal and BW Limiter)
• lot of changes in buildtypes (some removed, add new)
• RT-N builds only:

• WL 5.100.138.20 SDK: wl binaries, et/bcm57xx drivers, dnsmq module
• Asus RT-N10U: fix USB led
• Asus RT-N15U: fix USB led
• Support Asus RT-N53 (no 5GHz support, 2,4GHz only)
• WNR3500Lv2 – Fixed display Free NVRAM on Admin->Configuration page (thx @krisan)
• Add new Linksys E-series routers support (thx @tvlz)

[RELEASE] 092

• Fix GUI broken in 090 in build without VPN
• Fix PPTP when used over WAN setup using PPPoE
• Transmission: lot of changes in compilation process:

• update to 2.51
• remove gettext from depends
• add libiconv + patches from openwrt
• revert transmission-remote tool as optional (TR_EXTRAS). Included in Mega-VPN and AIO builds
• add EVENT_NOEPOLL=1 to startup script
• result = very stable transmsision and very fast GUI

• BW Limiter: few fixes:

• fix default class for br3
• fix default classes (br1\br2\br3) when default class br0 is enabled

• curl update from 7.21.1 to 7.25.0
• libevent update from 2.0.11 to 2.0.18
• OpenSSL update from 1.0.0d to 1.0.1-stable including all teddy`s patches/changes
• 3G Modem: Add ttyUSB1 and ttyUSB3 to modem device list

[RELEASE] 090

• added MultiSSID
• added PPTP server
• change blocklist update function to not using transmission-remote nomore
• remove transmission-remote will save lot of space
• remote TR_EXTRAS (transmission-create)
• OpenVPN update to 2.2.2
• BW Limiter: default classes for each LAN (br1/2/3)

[RELEASE] 088

• dnscrypt-proxy integration with GUI (basic -> network)
• UDPxy integration with GUI by Teaman (advanced -> firewall)
• qos-graphs fixed
• status-overview fixed (works autorefresh and show buttons)
• increase max of bwlimit entries from 40 to 80
• removed user-define imq settings (advanced -> firewall)
• don`t disable USB 3G box when storage checkbox is not checked
• ups monitor service improvements
• two new buildtypes (BT and Mega without VPN)
• remove CIFS and JFFS from BT-VPN - was too big for 8MB routers
• Mega-VPN is now only for router with more than 8MB flash
• add UPS feature to AIO

[RELEASE] 087

• fix usb_modeswitch (libusb error). 3G support will works now
• USB Speed improved. Old schema detection enabled.
• miniDLNA update from 1.0.22 to 1.0.24
• little cosmetics changes in Overview page. Able to show/hide each section
• IP Traffic: when/if set to 'disabled', we 'really' mean it
• fix VLAN support for WNR3500Lv2 and remove JFFS support for this router
• remove JFFS and SNMP from BT-VPN build. Image was to big for routers with 8MB flash memory.
• propably this is the last release of K24

[RELEASE] 085

• ip6tables fixed - "account" and "lan access" error
• fix Toggle Visibility on QoS pages
• fix syslog service when custom path is enabled
• WOL should now works on br1,2,3
• cosmetics changes in status-overview about LAN section
• Transmission update from 2.42 to 2.50

Build 084V removed.