Telefonica Smart Home Gateway (Picasso)
From TechInfoDepot
Jump to navigationJump to searchbgn (N300) | |
---|---|
Smart Home Gateway | |
WikiDevi.wi-cat.ru | |
3rd Party Firmware | |
dd-wrt |
Status Unknown |
OpenWrt | |
Tomato any flavor |
Incompatible |
Gargoyle |
Status Unknown |
Platform | |
Brand • Model • Rev |
Telefonica Smart Home Gateway (Picasso) |
FCC ID | |
IC ID | |
Board ID |
ANZ00B-1.6 |
Type |
access point, IoT hub |
CPU1 | |
CPU1 Type |
MIPS 24KEc |
CPU1 Speed |
580 MHz 32-bit |
Flash1 Chip |
ESMT Model? |
Flash1 Size |
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> |
RAM1 Size |
128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> |
RAM1 Chip |
Nanya NT6TU64M16GG-AC |
ETH chip1 | |
ETH chip2 |
Atheros AR8035-A |
Ethernet Port Count |
1-1GbE-LAN |
Wired Standard |
IEEE 802.3i/3u/3ab |
802dot11 OUI: none specified | |
Expansion IF types |
USB 2.0 |
USB ports |
1 |
USB Hub Compatible |
Untested |
Power |
12 VDC, 1 A |
Connector type |
barrel |
Serial Port (UART) |
yes, 3.3V TTL |
Flags: Z-Wave, GSM, GPRS | |
Additional chips | |
Other | |
| |
Manuf/OEM/ODM |
SerComm NA930 ZW2G |
3rd Party Firmware Support | |
Retail | |
Availability | End of Life |
FCC approval date | 17 September 2013 |
Country of manuf | Taiwan |
Radio 1 | |
Chip1 | |
Wireless interface OUI |
none specified |
Antenna Connector Type |
U.FL |
MIMO status |
2x2:2 |
Wireless Standard |
IEEE 802.11b/g/n |
802.11n |
up to 300 Mbps |
802.11g |
up to 54 Mbps |
802.11b |
up to 11 Mbps |
WiFi Operating Frequency |
2.4 GHz |
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.
- • 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class
Overview
"ANZ00B-1.6" is silkscreened on the board in the FCC photos.
- Radial capacitors on the FCC EUT seem to be Lelon branded.
There is a Telit GE910-QUAD cellular modem (GSM/GPRS, 2.5G)
- module on the board (FCC ID: RI7GE910, IC ID: 5131A-GE910)
The power adapter shown is a Sunny SYS1381-1212-W2
- (100-240VAC ~ 50-60Hz, 0.5A -> 12VDC, 1.0A).
See also: SerComm NA900
- FCC ID: P27NA900A
Flashing
NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
On the OpenWrt ToH (techdata entry)
On the OpenWrt Wiki
On the OpenWrt Forum
OpenWrt Target: ramips
OpenWrt Subtarget: mt7620
OpenWrt Package architecture: mipsel_24kc
Support started version: 15.05
Current supported version: 23.05.5
Comment:
aka "Picasso gateway"; RAM NANYA NT5TU64M16GG-AC;
On the OpenWrt Wiki
On the OpenWrt Forum
OpenWrt Target: ramips
OpenWrt Subtarget: mt7620
OpenWrt Package architecture: mipsel_24kc
Support started version: 15.05
Current supported version: 23.05.5
Comment:
aka "Picasso gateway"; RAM NANYA NT5TU64M16GG-AC;
Please insert instructions here
Categories:
- Telefonica
- Embedded system/access point
- Embedded system/IoT hub
- Embedded System MediaTek
- Embedded System MT7620A
- MediaTek
- Embedded System MIPS 24KEc
- Embedded System
- Embedded System AR8035-A
- Embedded System Atheros
- Atheros
- Manuf SerComm
- OpenWrt Supported
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- English Documentation