Telsey CPVL7
From TechInfoDepot
Jump to navigationJump to search
| abgn (AN600) | |
|---|---|
| Home Network Gateway | |
| 3rd Party Firmware | |
| dd-wrt | Status Unknown |
| OpenWrt | Status Unknown |
| Tomato any flavor | Status Unknown |
| Platform | |
| Brand • Model • Rev | Telsey CPVL7 (2GGV) |
| FCC ID | none specified |
| Board ID | TP460B2F |
| Type | wireless router, dsl modem, analog phone gateway, ONT |
| CPU1 | Broadcom BCM6369 |
| CPU1 Type | BMIPS4350 |
| CPU1 Speed | 400 MHz ( 2 cores ) |
| Flash1 Chip | Spansion S29GL128P90TFCR1 |
| Flash1 Size | 16 MiB 16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> |
| RAM1 Size | 64 MiB 67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> |
| RAM1 Chip | SK hynix H5DU2562GTR x 2 |
| ETH chip1 | Broadcom BCM6369 |
| ETH chip2 | Broadcom BCM54610 |
| ETH chip3 | Broadcom BCM54616S |
| Switch | Broadcom BCM6369 |
| Ethernet Port Count |
1-1GbE-WAN 4-100MbE-LAN |
| Wired Standard | IEEE 802.3i/3u/3ab |
|
802dot11 OUI: none specified | |
| Expansion IF types | USB 2.0, SFP |
| USB ports | 2 |
| SFP ports | 1 |
| USB Hub Compatible | Untested |
| Power | 12 VDC, 2 A |
| Connector type | barrel |
|
Flags: | |
|
Additional chips | |
| Other | |
|
| |
| Manuf/OEM/ODM | Telsey |
| Retail | |
| (Est.) release date | November 2011 |
| Country of manuf | Italy |
| Radio 1 | |
| Chip1 | Ralink RT2860 |
| Chip2 | Ralink RT2850 |
| Wireless interface OUI | none specified |
| Antenna Connector Type | none specified |
| MIMO status | 2x3:2 |
| Wireless Standard | IEEE 802.11a/b/g/n |
| 802.11n | up to 300/300 Mbps |
| 802.11g | up to 54 Mbps |
| 802.11b | up to 11 Mbps |
| 802.11a | up to 54 Mbps |
| WiFi Operating Frequency | 2.4 or 5 GHz |
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
Overview
PCB has model number: Telsey TP460B2F
- The BCM54616S is wired to an SFP for FTTH, with an unpopulated
- footprint for magnetics and a RJ45 (which would allow gigabit?)
- The BCM54610 is wired to the 1x WAN (GbE) port connector,
- 4x LAN ports are wired to SoC Broadcom BCM6369KPBG
These were used for 100Mbps FTTH service as a PON _only_ (wifi
- and usb were disabled) by Gagnaveita Reykjavik in Iceland
They seem to have been used by Altibox in Norway,
- and Amis in Slovenia as well
On an Icelandic box, the outside sticker declares the box to
- be a CPL7, rather than the CPVL7.
CPVL7 is used on all internal firmware text, bootloader options,
- and is the name used on overseas versions.
JTAG-Serial Info
Serial
Serial Pinouts
Serial console (115200, 8n1) is available, but requires both
- adding and removing solder jumpers.
Pictures
- Some more images at https://imgur.com/a/IqN8Gvz
Categories:
- Telsey
- Embedded system/wireless router
- Embedded system/dsl modem
- Embedded system/analog phone gateway
- Embedded system/ONT
- Embedded System Broadcom
- Embedded System BCM6369
- Broadcom
- Embedded System BMIPS4350
- Embedded System
- Embedded System BCM54610
- Embedded System BCM54616S
- Manuf Telsey
- Embedded System Ralink
- Embedded System RT2860
- Ralink
- Embedded System RT2850
- Has Mimo Status
- Embedded System IEEE 802.11a/b/g/n
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- English Documentation