Teltonika RUT200

bgn (N300)
INDUSTRIAL CELLULAR ROUTER
Homepage	Product page
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Supported
Tomato any flavor	Incompatible
Gargoyle	Status Unknown
Platform
Brand • Model • Rev	Teltonika RUT200
FCC ID	none specified
Type	LTE modem, wireless router
CPU1 Y	MediaTek MT7628AN
CPU1 Type	MIPS 24KEc
CPU1 Speed	580 MHz
Flash1 Chip	Winbond W25Q128
Flash1 Size	16 MiB 16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (SPI)
RAM1 Size	128 MiB 134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br />
RAM1 Chip	EtronTech EM68C16CWQG-25IH
ETH chip1	MediaTek MT7628AN
Switch	MediaTek MT7628AN
Ethernet Port Count	2-100MbE-LAN
Wired Standard	IEEE 802.3i/3u
802dot11 OUI: none specified
Stock bootloader	U-Boot
Expansion IF types	none specified
PoE	Passive
Power	9-30 VDC, ? A
Flags: LTE
Other
3rd Party Firmware Support	OpenWrt • (List | Dev | DLs)
Radio 1
Chip1	MediaTek MT7628AN
Wireless interface OUI	none specified
Antenna Connector Type	none specified
MIMO status	2x2:2
Wireless Standard	IEEE 802.11b/g/n
802.11n	up to 300 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz

For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.

• 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class

Flashing

Flashing OpenWrt

On the OpenWrt ToH (techdata entry)
On the OpenWrt Wiki

Target: ramips
Subtarget: mt76x8
Package architecture: mipsel_24kc
Supported Since Commit
Support started version: 25.12.0
Current supported version: 25.12.5

Unsupported Functions:
Cellular Signal strength LEDs
LAN Hardware: MediaTek MT7628AN
LAN Comment: Quectel EC200A 4G, cat 4, 3GPP release 9 Modem
WLAN Hardware: MediaTek MT7628AN
Installation method(s):
GUI generic, see git-commit
Recovery method(s):
see git-commit
Comment:
Quectel EC200A 4G, cat 4, 3GPP release 9 Modem

git • >>

ramips: mt76x8: add support for Teltonika RUT200 Specification: SoC: MediaTek MT7628AN RAM: 128 MB EtronTech EM68C16CWQG-25IH Flash: 16MB Winbond W25Q128 SPI Switch: MediaTek MT7628AN, 2 ports 100 Mbps WiFi: MediaTek MT7628AN 2.4 GHz 802.11n Modem: Quectel EC200A 4G, cat 4 GPIO: - 1 button (Reset) - 8 LEDs (2G, 3G, 4G, RSSI 1,2,3,4,5) - 2 Modem control (power button, reset) - 1 Digital input - 1 Digital output Flashing via OEM WebUI: 1. Download the firmware image *-squashfs-factory.bin 2. Upload firmware image via OEM WebUI firmware update, do not keep settings To revert back to OEM firmware: https://wiki.teltonika-networks.com/view/Bootloader_menu To enable mobile data connection send command to modem: echo -ne 'AT+QNETDEVCTL=3,1\r\n' > /dev/ttyUSB2 Create DHCP interface with usb0 device.