Teltonika RUT951
From TechInfoDepot
Jump to navigationJump to search
| bgn (N300) | |
|---|---|
| INDUSTRIAL CELLULAR ROUTER | |
 | |
| Homepage | Product page |
| 3rd Party Firmware | |
| dd-wrt | Status Unknown |
| OpenWrt | Supported |
| Tomato any flavor | Incompatible |
| Gargoyle | Status Unknown |
| Platform | |
| Brand • Model • Rev | Teltonika RUT951 |
| FCC ID | none specified |
| Type | wireless router |
CPU1  | MediaTek MT7628AN |
| CPU1 Type | MIPS 24KEc |
| CPU1 Speed | 580 MHz |
| Flash1 Chip | Brand? Model? |
| Flash1 Size | 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> |
| RAM1 Size | 128 MiB 134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> |
| RAM1 Chip | Brand? Model? |
| ETH chip1 | MediaTek MT7628AN |
| Switch | MediaTek MT7628AN |
| Ethernet Port Count | 4-100MbE-LAN |
| Wired Standard | IEEE 802.3i/3u |
|
802dot11 OUI: none specified | |
| Stock bootloader | U-Boot |
| Expansion IF types | none specified |
| Power | 9-30 VDC, ? A |
|
Flags: | |
|
| |
| Other | |
|
| |
| 3rd Party Firmware Support |
OpenWrt • (List | Dev | DLs) |
| Radio 1 | |
| Chip1 | MediaTek MT7628AN |
| Wireless interface OUI | none specified |
| Antenna Connector Type | none specified |
| MIMO status | 2x2:2 |
| Wireless Standard | IEEE 802.11b/g/n |
| 802.11n | up to 300 Mbps |
| 802.11g | up to 54 Mbps |
| 802.11b | up to 11 Mbps |
| WiFi Operating Frequency | 2.4 GHz |
For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.
- • 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
Target: ramips
Subtarget: mt76x8
Package architecture: mipsel_24kc
Supported Since Commit
Support started version: 25.12.0
Current supported version: 25.12.2
Subtarget: mt76x8
Package architecture: mipsel_24kc
Supported Since Commit
Support started version: 25.12.0
Current supported version: 25.12.2
LAN Hardware: MediaTek MT7628AN
LAN Comment: Quectel EC25-EUX 4G cat 4 modem, passive PoE on LAN1
WLAN Hardware: MediaTek MT7628AN
Installation method(s):
see git-commit
Recovery method(s):
see git-commit
Comment:
IP30 Ingress Protection, Industrial rated
LAN Comment: Quectel EC25-EUX 4G cat 4 modem, passive PoE on LAN1
WLAN Hardware: MediaTek MT7628AN
Installation method(s):
see git-commit
Recovery method(s):
see git-commit
Comment:
IP30 Ingress Protection, Industrial rated
| git • >> |
|---|
ramips: mt76x8: add Teltonika RUT951/RUT901 support
Specification:
- MediaTek MT7628AN SoC
- 128 MB of RAM EtronTech EM68C16CWQG-25IH
- 16MB of Flash Winbond W25Q128 SPI
- 4x 10/100 Mbps Ethernet, with passive PoE support on LAN1
- MediaTek MT7628AN 2.4 GHz 802.11n WiFi
- Quectel EC25-EUX 4G cat 4 modem (RUT951) or Quectel EC200A-EU 4G cat 4 modem (RUT901)
- 1x Digital input
- 1x Digital output
- 2x SIM slot (can be swapped via GPIO)
- eSIM (depends on hardware configuration, can be swapped via GPIO)
GPIO:
- 1 button (Reset)
- 7 LEDs (power, status green/red, RSSI 1,2,3,4,5)
- 5 Modem control (power button, reset, status, SIM select, eSIM select)
- 1 Digital input
- 1 Digital output
Flashing via OEM WebUI:
1. Download the firmware image *-squashfs-factory.bin
2. Upload firmware image via OEM WebUI firmware update, do not keep settings
To revert back to OEM firmware:
https://wiki.teltonika-networks.com/view/Bootloader_menu
Mobile data connection:
Quectel EC200A-EU send command to modem:
echo -ne 'AT+QNETDEVCTL=3,1\r\n' > /dev/ttyUSB2
Create DHCP interface with usb0 device.
Quectel EC25-EUX create proto qmi interface.
|
