Teltonika RUT955

From TechInfoDepot
Jump to navigationJump to search
multiple revisions of this device, use caution
bgn (N150)
Compact industrial 4G (LTE) router
Homepage Product page
3rd Party Firmware
dd-wrt Status Unknown
OpenWrt Partial Support
Tomato any flavor Incompatible
Gargoyle Status Unknown
Platform
BrandModelRev Teltonika RUT955
FCC ID 2AET4RUT955AF
Type LTE router
CPU1 checkY Atheros AR9344
CPU1 Type MIPS 74Kc
CPU1 Speed 560 MHz 32-bit
Flash1 Chip Brand? Model?
Flash1 Size 16 MiB 16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br />
RAM1 Size 128 MiB 134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br />
RAM1 Chip Brand? Model?
ETH chip1 Atheros AR9344
Switch Atheros AR9344
Ethernet Port Count 1-100MbE-WAN
3-100MbE-LAN
Wired Standard IEEE 802.3i/3u

802dot11 OUI: none specified

Stock bootloader U-Boot
Expansion IF types microSDHC
SD/MMC Slots 1
PoE Passive
Power 9-30 VDC, ? A
Connector type 4-pin
Serial Port (UART) yes
Other

Default SSID: RUT
Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1359 additional devices
of which 0 are Teltonika devices
Default login user: admin
Default login password: admin01
admin:admin01 credentials used by 2 additional devices
of which 0 are Teltonika devices

3rd Party Firmware Support OpenWrt • (List | Dev | DLs)
Retail
Availability End of Life
End of Life date 2023
FCC approval date 20 November 2020
Country of manuf Lithuania
Radio 1
Chip1 Atheros AR9331
Wireless interface OUI none specified
Antenna Connector Type RP-SMA
MIMO status 1x2:1
Wireless Standard IEEE 802.11b/g/n
802.11n up to 150 Mbps
802.11g up to 54 Mbps
802.11b up to 11 Mbps
WiFi Operating Frequency 2.4 GHz
 CPU1 brandRadio1 chip1 brandRadio1 chip2 brand
Teltonika RUT955AtherosAtheros
Teltonika RUT955 H7V3C0AtherosAtheros

For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.

150 Mbps - 1SS 2.4GHz 802.11n (40MHz chan.) = N150 class

Overview

Features

  • CPU: Atheros Wasp(AR9344), MIPS 74Kc, 550 MHz
  • Mobile module: 4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps
  • Wireless: 802.11b/g/n
  • RAM: 128 MB, DDR2
  • FLASH storage: 16 MB, SPI Flash
  • Ports: 3 x LAN, 1 x WAN, USB, RS232, RS485
  • OS: RutOS (OpenWrt based Linux OS)

Services

  • VRRP
  • TR-069
  • Web Filter
  • MQTT
  • NTP
  • RS232/RS485
  • VPN
  • Dynamic DNS
  • SMS Utilities
  • SMS Gateway
  • SNMP
  • GPS
  • Wake on LAN
  • Hotspot
  • CLI
  • Auto Reboot
  • Modbus
  • USB Tools
  • Port Mirroring
  • UPNP
  • Input/Output
  • QoS

Links of Interest

Official Supports

Technical information resources
Community
On the OpenWrt Wiki Techdata

Flashing

Flashing OpenWrt

Target: ath79
Subtarget: generic
Package architecture: mips_24kc
Supported Since Commit
Support started version: 21.02.0
Current supported version: 25.12.1
Unsupported Functions:
microSD
LAN Hardware: Atheros AR9344
WLAN Hardware: Atheros AR9344
Installation method(s):
GUI OEM, U-Boot web recovery, see git-commit
Recovery method(s):
U-Boot web recovery
git • >>
ath79: add support for Teltonika RUT955
Specification:

- 550/400/200 MHz (CPU/DDR/AHB)
- 128 MB of RAM (DDR2)
- 16 MB of FLASH (SPI NOR)
- 4x 10/100 Mbps Ethernet, with passive PoE support on LAN1
- 2T2R 2,4 GHz (AR9344)
- built-in 4G/3G module (example: Quectel EC-25EU)
- internal microSD slot (spi-mmc, buggy and disabled for now)
- RS232 on D-Sub9 port (Cypress ACM via USB, /dev/ttyACM0)
- RS422/RS485 (AR934x high speed UART, /dev/ttyATH1)
- analog 0-24V input (MCP3221)
- various digital inputs and outputs incl. a relay
- 11x LED (4 are driven by AR9344, 7 by 74HC595)
- 2x miniSIM slot (can be swapped via GPIO)
- 2x RP-SMA/F (Wi-Fi), 3x SMA/F (2x WWAN, GPS)
- 1x button (reset)
- DC jack for main power input (9-30 V)
- debugging UART available on PCB edge connector

Serial console (/dev/ttyS0) pinout:

- RX: pin1 (square) on top side of the main PCB (AR9344 is on top)
- TX: pin1 (square) on bottom side

Flash instruction:

Vendor firmware is based on OpenWrt CC release. Use the "factory" image
directly in GUI (make sure to uncheck "keep settings") or in U-Boot web
based recovery. To avoid any problems, make sure to first update vendor
firmware to latest version - "factory" image was successfully tested on
device running "RUT9XX_R_00.06.051" firmware and U-Boot "3.0.2".