Template:DDWRT/Notice
Usage
{{DDWRTNotice|notsupported}} gives:
This divice is not supported by dd-wrt. |
{{DDWRTNotice|activation}} gives:
DD-WRT Activation Required. |
{{DDWRTNotice|asusflash}} gives:
NOTE: It is recommended to use ASUS Firmware restoration tool for ASUS routers initial flash (use *.TRX file). |
{{DDWRTNotice|asusintflash}} gives:
initial flash via Asus tool, VINTage firmware needed. |
{{DDWRTNotice|belkin}} gives:
WARNING: Always use TFTP to flash Belkin routers if at all possible! Upgrading dd-wrt from the web interface can lead to a bricked (nonfunctional) unit! |
{{DDWRTNotice|beta}} gives:
WARNING: This is highly beta DD-WRT version. This image may brick your router. Make sure you have serial cable to debrick router!! |
{{DDWRTNotice|k24req}} gives:
WARNING: Requires K2.4 for DD-WRT, Do not flash anything else! |
{{DDWRTNotice|k26req}} gives:
WARNING: Requires K2.6 for DD-WRT, Do not flash anything else! |
{{DDWRTNotice|k3xreq}} gives:
WARNING: Requires K3.x for DD-WRT, Do not flash anything else! |
{{DDWRTNotice|norevert}} gives:
***Warning*** There is no Revert for this router at this time. |
{{DDWRTNotice|nv32kreq}} gives:
WARNING: Device has 32k nvram, Do not flash builds for 60k and 64k nvram |
{{DDWRTNotice|nv60kreq}} gives:
WARNING: Requires nv60k for DD-WRT after initial flash, Do not flash anything else! |
{{DDWRTNotice|nv64kreq}} gives:
WARNING: Requires nv64k for DD-WRT after initial flash, Do not flash anything else! |
{{DDWRTNotice|micro}} gives:
NOTE: This device supports Micro. |
{{DDWRTNotice|microno}} gives:
WARNING: Do not flash micro this unit! |
{{DDWRTNotice|microplus}} gives:
NOTE: This device supports Micro and Micro-plus. |
{{DDWRTNotice|microreq}} gives:
WARNING: Requires Micro for DD-WRT, Do not flash anything else! |
{{DDWRTNotice|trailednv60k}} gives:
WARNING: Initial flash must be with a tailed build, after which any build with -nv60k can be used. |
{{DDWRTNotice|trailednv64k}} gives:
WARNING: Initial flash must be with a tailed build, after which any build with -nv64k can be used. |
{{DDWRTNotice|vintmicroreq}} gives:
WARNING: Requires Micro VINT for DD-WRT, Do not flash anything else! |
{{DDWRTNotice|vintreq}} gives:
WARNING: Requires VINT for DD-WRT, Do not flash anything else! |
{{DDWRTNotice|vintstable}} gives:
For DD-WRT, These units seems to run more stable on the VINT builds.NEWD or VINT |
{{DDWRTNotice|wapflash}} gives:
WARNING: DD-WRT was not originally intended to be loaded on a WAP unit. It was found that it will run but it is a tricky unit to load and have function correctly. Below are a compilation of methods/instructions to assist you with creating a DD-WRT loaded WAP unit. |
{{DDWRTNotice|wip}} gives:
WARNING: DD-WRT Support for this device is Work In Progress (WIP). Test builds should only be flashed by experienced users. Test builds could cause unseen side effects. |
{{DDWRTNotice|no303030}} gives:
***Warning*** DO NOT PERFORM A 30/30/30 VIA RESET BUTTON! |
See also
User:DarkShadow/TechInfoDepot Templates/Message Notices
The above documentation is transcluded from Template:DDWRT/Notice/doc. (edit | history) Editors can experiment in this template's sandbox (create | mirror) and testcases (create) pages. Please add categories to the /doc subpage. Subpages of this template. |