Tenda 4G301
bgn (N300) | |
---|---|
Wireless N300 3G/4G Router w/ 5200mAh Mobile Power Bank | |
3rd Party Firmware | |
dd-wrt | Status Unknown |
OpenWrt | Was Supported |
Tomato any flavor | Incompatible |
Gargoyle | Status Unknown |
Platform | |
Brand • Model • Rev | Tenda 4G301 |
FCC ID | V7T4G301 |
Type | 3G mobile router |
CPU1 ![]() | MediaTek MT7620N |
CPU1 Type | MIPS 24KEc |
CPU1 Speed | 580 MHz |
Flash1 Chip | GigaDevice GD25Q32BSIG |
Flash1 Size | 4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> |
RAM1 Size | 32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> |
RAM1 Chip | Winbond Model? |
ETH chip1 | MediaTek MT7620N |
Ethernet Port Count | 1-100MbE-LAN |
Wired Standard | IEEE 802.3i/3u |
802dot11 OUI: none specified | |
Stock bootloader | U-Boot |
Expansion IF types | USB 2.0 |
USB ports | 1 |
USB Hub Compatible | Untested |
Power | 5 VDC, 1.2 A |
Connector type | USB Female (Micro-B) |
Serial Port (UART) | yes, internal, 4-pin header, 3.3V TTL |
Flags: | |
| |
Other | |
Default SSID: Tenda_XXXXXX (26 addl. devices) | |
Manuf/OEM/ODM | Tenda |
3rd Party Firmware Support |
OpenWrt (Was) |
Retail | |
Availability | End of Life |
FCC approval date | 21 March 2014 |
Country of manuf | China |
Radio 1 | |
Chip1 | MediaTek MT7620N |
Wireless interface OUI | none specified |
Antenna Connector Type | none |
MIMO status | 2x2:2 |
Wireless Standard | IEEE 802.11b/g/n |
802.11n | up to 300 Mbps |
802.11g | up to 54 Mbps |
802.11b | up to 11 Mbps |
WiFi Operating Frequency | 2.4 GHz |
For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.
For a list of all currently documented Tenda devices with specifications, see Tenda.
- • 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class
Overview
"10016874" <??>, "V1.0", and a lead-free logo looks to be silkscreened
- on the main board in the FCC photos.
- "10017725" (1) / "10017724" (2) and "V1.0" + a lead-free logo (both)
- is silkscreened on the antenna boards.
Default settings (including the SSID) are per the FCC manual + label..
The FCC photos show the batteries (there's two..) used as
- (Dongguan Kanyo Battery?) KANYOIRC18950F8s (3.7V, 2600mAh).
Flashing
![]() | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
![]() | This device is NO LONGER SUPPORTED OR POSSIBLE for future use with OpenWrt. |
On the OpenWrt Wiki
OpenWrt Target: ramips
OpenWrt Subtarget: mt7620
OpenWrt Package architecture: mipsel_24kc
Support started version: unknown
Current supported version: EOL
Please insert instructions here
- Tenda
- Embedded system/3G mobile router
- Embedded System MediaTek
- Embedded System MT7620N
- MediaTek
- Embedded System MIPS 24KEc
- Embedded System
- Manuf Tenda
- OpenWrt Was Supported
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- Single-Band
- English Documentation