Tenda N80
From TechInfoDepot
Jump to navigationJump to search
| abgn (AN900) | |
|---|---|
| Wireless N900 Concurrent Dual-band Gigabit Router | |
| Homepage | Product page |
| 3rd Party Firmware | |
| dd-wrt | Status Unknown |
| OpenWrt | Status Unknown |
| Tomato any flavor | Status Unknown |
| Gargoyle | Status Unknown |
| Platform | |
| Brand • Model • Rev | Tenda N80 (N9+) |
| FCC ID (fcc.io) | V7TN80 |
| FCC ID (fcc.report) | V7TN80 |
| Type | wireless router |
| CPU1 | Broadcom BCM4706 |
| CPU1 Type | MIPS 74Kc |
| CPU1 Speed | 600 MHz 8-bit |
| Flash1 Chip | Macronix MX25L6408E |
| Flash1 Size | 8 MiB 8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> |
| RAM1 Size | 128 MiB 134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> |
| RAM1 Chip | Nanya NT5TU64M16DG-AC x 2 |
| ETH chip1 | Broadcom BCM4706 |
| Switch | Broadcom BCM4706 |
| Ethernet Port Count |
1-1GbE-WAN 4-1GbE-LAN |
| Wired Standard | IEEE 802.3i/3u/3ab |
|
802dot11 OUI: none specified | |
| Expansion IF types | USB 2.0 |
| USB ports | 1 |
| USB Hub Compatible | Untested |
| Power | 12 VDC, 1.5 A |
| Connector type | barrel |
| Serial Port (UART) | yes, 4-pin header |
|
| |
|
| |
| Other | |
|
Default IP address: 192.168.0.1 | |
| 3rd Party Firmware Support |
FreshTomato • (List | DLs) |
| Retail | |
| Availability | End of Life |
| FCC approval date | 11 April 2013 |
| (Est.) release date | 21 October 2013 |
| (Est.) initial retail price (in USD): | $165 |
| UPC |
885397020301 (UPC DB, On eBay) |
| EAN |
0885397020301 (UPC DB, On eBay) |
| Newegg | N82E16833555046 |
| ASIN |
B00CU9GUDA |
| Country of manuf | China |
| Radio 1 | |
| Chip1 | Broadcom BCM4331 |
| Wireless interface OUI | none specified |
| Antenna Connector Type | U.FL |
| MIMO status | 3x3:3 |
| Wireless Standard | IEEE 802.11b/g/n |
| 802.11n | up to 450 Mbps |
| 802.11g | up to 54 Mbps |
| 802.11b | up to 11 Mbps |
| WiFi Operating Frequency | 2.4 GHz |
| Radio cor_rev | 29 |
| Radio 2 | |
| Chip1 | Broadcom BCM4331 |
| Wireless interface OUI | none specified |
| Antenna Connector Type | U.FL |
| MIMO status | 3x3:3 |
| Wireless Standard | IEEE 802.11a/n |
| 802.11n | up to 450 Mbps |
| 802.11a | up to 54 Mbps |
| WiFi Operating Frequency | 5 GHz |
| Radio cor_rev | 29 |
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Tenda devices with specifications, see Tenda.
Overview
This device was previously known (as in, before launch) as the N9+.
The FCC photos appear to show the device with 2x Nanya NT5TU64M16DG-AC RAM chips (128MB each, 256MB total).
- The board is also shown as covered with a large heatsink (similarly to the ASUS RT-N66U).
The device is presumed to be fully Broadcom based..
Default credentials are per the FCC manual / installation guide.
Links of Interest
Forum threads
- There appear to be two different Flash memory versions of this router:
- WL Driver version 5x has 8 MiB of flash memory (part number MX25L6408E)
- WL Driver version 6x has 16 MiB of flash memory
Pictures
Categories:
- Tenda
- Embedded system/wireless router
- Embedded System Broadcom
- Embedded System BCM4706
- Broadcom
- Embedded System MIPS 74Kc
- Embedded System
- Tomato Supported
- Embedded System BCM4331
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Embedded System IEEE 802.11a/n
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- English Documentation