Thomson SpeedTouch 780 WL

From TechInfoDepot
Jump to navigationJump to search
bg (G54)
wireless router, dsl modem, analog phone gateway
3rd Party Firmware
dd-wrt Status Unknown
OpenWrt Status Unknown
Tomato any flavor Status Unknown
Platform
BrandModelRev Thomson SpeedTouch 780 WL
FCC ID RSE-ST780
Type wireless router, dsl modem, analog phone gateway
CPU1 checkY Broadcom BCM6348
CPU1 Type BMIPS3300
CPU1 Speed 256 MHz
Flash1 Chip Brand? Model?
Flash1 Size ? MiB
RAM1 Size ? MiB
RAM1 Chip Brand? Model?
ETH chip1 Broadcom BCM6348
Switch Broadcom Model?
Ethernet Port Count 4-100MbE-LAN
Wired Standard IEEE 802.3i/3u

802dot11 OUI: 00:90:D0

Expansion IF types none specified
Power 18-22 VDC, 1 A
Other

Default IP address: 192.168.1.254
the IP 192.168.1.254 is used by 157 additional devices
of which 4 are Thomson devices
Default login user: Administrator
Default login password: blank
Administrator:blank credentials used by 1 additional devices
of which 1 are Thomson devices

Manuf/OEM/ODM Askey RTA1006VW-D49
Retail
FCC approval date 29 December 2005
Radio 1
Chip1 Broadcom BCM4318
Wireless interface OUI 00:90:D0
Antenna Connector Type none specified
Wireless Standard IEEE 802.11b/g
802.11g up to 54 Mbps
802.11b up to 11 Mbps
WiFi Operating Frequency 2.4 GHz
Radio cor_rev 9

For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.

For a list of all currently documented Thomson devices with specifications, see Thomson.

54 Mbps - 2.4GHz 802.11g = G54 class

Overview

The FCC ID appears to apply to multple models (which are listed below)...

  • SpeedTouch 780 WL
    • DSLBB643 EB
    • DSLBB843 EB
    • DSLBB643 EE
  • SpeedTouch 706 WL
    • DSLBB643 ED
    • DSLBB843 ED
    • DSLBB843 EF

There appears to be an Infineon (?? or not) chip on-board to handle VoIP.

The default SSID is probably SpeedTouchXXXXXX, where XXXXXX is probably some combination hex digits (probably upper case letters). Administrator:blank is probably the default Telnet and FTP password. HTTP web configuration may be (by default) unprotected.

Links of Interest

User's guide

On the OpenWrt wiki