UDOO NEO Full

multiple revisions of this device, use caution

bgn (N300)
UDOO Neo
Homepage	Product page
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Status Unknown
Tomato any flavor	Incompatible
Gargoyle	Status Unknown
Platform
Brand • Model • Rev	UDOO NEO Full
FCC ID	Z64-WL18SBMOD
IC ID	4511-WL18SBMOD
Type	single-board computer
CPU1	Freescale (NXP) i.MX6SX
CPU1 Type	ARM Cortex-A9
CPU1 Speed	1.0 GHz ( 2 cores )
Flash1 Chip	Brand? Model?
Flash1 Size	0 MiB0 B <br />0 Kib <br />0 KiB <br />0 Mib <br />0 GiB <br /> (MicroSD Card slot)
RAM1 Size	1 GiB 1,024 MiB <br />1,073,741,824 B <br />8,388,608 Kib <br />1,048,576 KiB <br />8,192 Mib <br /> (DDR3 SDRAM)
RAM1 Chip	Micron MT41K256M16HA-125 x 2
ETH chip1	Freescale (NXP) i.MX6SX
ETH chip2	Microchip KSZ8091
Ethernet Port Count	1-100MbE-LAN
Wired Standard	IEEE 802.3i/3u
802dot11 OUI: none specified
Stock bootloader	U-Boot
Stock FW OS	Linux 3.14.56 Ubuntu 14.04
Expansion IF types	USB 2.0, MicroSD Card slot
USB ports	2
SD/MMC Slots	1
USB Hub Compatible	Untested
Power	12 VDC, 2 A
Connector type	barrel 5.5 mm (OD) 2.1 mm (ID)
Serial Port (UART)	yes, 3.3V TTL, (115200 8N1)
JTAG Port	yes, 14-pad header, J11
Flags: HDMI, LVDS, SPDIF, Bluetooth 4.0 LE, RTC w/ battery backup, CAN Bus, GPIO, accelerometer, gyroscope
Additional chips Low-Power 3D HDMI Transmitter;NXP;TDA19988BHN;;1; 3-Axis Digital Angular Rate Gyroscope;NXP;FXAS21002C;;1; 6-Axis Sensor w/ Accelerometer and Magnetometer;NXP;FXOS8700CQ;;1; 340kHz, 3A Synchronous DC-DC Buck Converter;BCD Semi;AP3503F;;2; 0.5A Dual Channel Power Switch;Diodes Inc;AP2152A;;1; PMIC;NXP;MC32PF3000;;1;
Other
Manuf/OEM/ODM	SECO
3rd Party Firmware Support	Android, Armbian
Retail
FCC approval date	03 February 2014
(Est.) release date	September 2015
(Est.) initial retail price (in USD):	$45
ASIN	B07WH52T18
Radio 1
Radio1 module	Texas Instruments WL18MODGB
Radio1 module IF	SDIO (module)
Chip1	Texas Instruments WL1835MOD
Wireless interface OUI	none specified
Antenna Connector Type	int. antenna
MIMO status	2x2:2
Wireless Standard	IEEE 802.11b/g/n
802.11n	up to 300 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz
FCC ID BeagleBone Black Wireless Z64-WL18SBMOD BeagleBone Blue Z64-WL18SBMOD Gumstix Pepper 43C Z64-WL18SBMOD SeeedStudio BeagleBone Green Gateway Z64-WL18SBMOD Texas Instruments WL18MODGB Z64-WL18SBMOD S4GEM35XB
CPU1 brand Radio1 chip1 brand Radio1 chip2 brand UDOO NEO Basic Freescale (NXP) UDOO NEO Full Freescale (NXP) Texas Instruments

For a list of all currently documented Freescale (NXP) SoC's with specifications, see Freescale.
For a list of all currently documented Microchip (SMSC) chipsets with specifications, see Microchip.
For a list of all currently documented Texas Instruments (TI) chipsets with specifications, see Texas Instruments.

• 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class

Overview

See also: List of Single-board computers

Hardware specification

• CPU: NXP i.MX6 Solo X (MCIMX6X4EVM10AB)

ARM (Cortex-A9) @1.0GHz/(Cortex-M4) @200MHz

• GPU: Vivante GC400T
• Memory: 1GB (SDRAM) DDR3
• Onboard Storage: TF card (max.64GB)/MMC card slot

Links of Interest

• UDOO Neo Documentation on UDOO.org Docs
• UDOO Neo = Raspberry Pi + Arduino + Wi-Fi + BT 4.0 + Sensors on Kickstarter
• UDOO Neo Development Board on CNX|Software

See also

• UDOO Dual
• UDOO Quad
• UDOO NEO Basic
• UDOO NEO Full