USRobotics USR8200
Secure Storage Router Pro, Firewall / VPN / NAS | |
Support | |
---|---|
Wikipedia | |
InfoDepot Wiki | |
3rd Party Firmware | |
dd-wrt | |
OpenWrt | |
Tomato any flavor |
Incompatible |
Gargoyle |
Status Unknown |
Platform | |
Brand • Model • Rev |
USRobotics USR8200 |
Board ID |
KN140172 |
Type |
VPN Router Firewall, NAS, router |
CPU1 |
Intel XScale IXP422 |
CPU1 Type |
ARM XScale |
CPU1 Speed |
266 MHz 32-bit |
Flash1 Chip |
Intel E28F128-J3A150 |
Flash1 Size |
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> |
RAM1 Size |
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> |
RAM1 Chip |
Mosel Vitelic V54C3256164VBLT7 x 4 |
ETH chip1 |
Intel XScale IXP422 |
ETH chip2 |
Altima AC101L |
Switch |
Marvell 88E6060 |
Ethernet Port Count |
1-100MbE-WAN 4-100MbE-LAN |
Wired Standard |
IEEE 802.3i/3u |
Stock bootloader |
RedBoot |
Stock FW OS |
Linux 2.4.19 OpenRG |
Expansion IF types |
USB 2.0, 1394a (Firewire) |
USB ports |
2 |
USB Hub Compatible |
Untested |
Power |
12 VDC, 3.33 A |
Connector type |
barrel |
Serial Port (UART) |
yes, 10-pin header, populated |
JTAG Port |
yes |
Flags: RTC w/ battery backup | |
Additional chips | |
Other | |
Default IP address: 192.168.1.1 | |
3rd Party Firmware Support | |
Retail | |
Availability | End of Life |
(Est.) release date | June 2003 |
UPC |
738168034963 (UPC DB, On eBay) |
ASIN | B0000A1EES |
Country of manuf | China |
For a list of all currently documented Altima chipsets with specifications, see Altima.
For a list of all currently documented Intel XScale SoC's with specifications, see Intel XScale.
For a list of all currently documented Marvell chipsets with specifications, see Marvell.
For a list of all currently documented USRobotics device with specifications, see USRobotics.
Overview
"P/N:KN140172" is silkscreened on the board in RN's image shown below..
- and on the board shown on the OpenWrt wiki page.
Links of Interest
Wikis
- CPU: Intel XScale IXP422 (FWIXP422AB)
Forum threads
Reviews
Flashing
NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing dd-wrt
Support started version: ?
Current supported version: wip, redboot must be installed
Comment:
see wiki
Please insert instructions here
Flashing OpenWrt
The development branch can contain experimental code that is under active development and should not be used for production environments. Snapshot images may support additional hardware; however, it is experimental, considered unstable, and sometimes won't compile. |
Prebuilt snapshot images do not come with any web interface or GUI. You will need to be comfortable using a command line and remote shell to install one yourself → How to install LuCI |
This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram.
DO NOT BUY DEVICES WITH 8MB FLASH / 64MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 8/64 warning for details. This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation. This means that you will not be able to install many packages, and that you might experience crashes due to OOM situations more or less often. See OpenWrt on 8/64 devices what you can do now. |
On the OpenWrt Wiki
OpenWrt Target: ixp4xx
OpenWrt Subtarget: generic
OpenWrt Package architecture: armeb_xscale
Support started version: WIP
Current supported version: snapshot
Please insert instructions here
Pictures
- USRobotics
- Embedded system/VPN Router Firewall
- Embedded system/NAS
- Embedded system/router
- Embedded System Intel XScale
- Embedded System IXP422
- Intel XScale
- Embedded System ARM
- Embedded System XScale
- Embedded System AC101L
- Embedded System Altima
- Altima
- Embedded System Marvell
- Embedded System 88E6060
- Marvell
- DD-WRT Supported
- OpenWrt Supported
- Wired Embedded System
- Embedded System
- English Documentation