Ubiquiti Networks NanoBeam M2

multiple revisions of this device, use caution
bgn (N300)
	High-Performance airMAX Bridge
Wikipedia	Ubiquiti Networks
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Status Unknown
Tomato any flavor	Incompatible
Platform
Brand • Model • Rev	Ubiquiti Networks NanoBeam M2 (NBE-M2)
FCC ID	SWX-NBM2HP
IC ID	6545A-NBM2HP
Type	bridge
CPU1	Brand? Model?
Flash1 Chip	Brand? Model?
Flash1 Size	? MiB
RAM1 Size	? MiB
RAM1 Chip	Winbond Model?
ETH chip1	Brand? Model?
Ethernet Port Count	1-100MbE-LAN
Wired Standard	IEEE 802.3i/3u
	802dot11 OUI: none specified;
Expansion IF types	none specified
PoE	non-standard (otherwise unspecified)
Power	24 VDC, 0.5 A
Connector type	Ethernet (PoE)
	Flags:; outdoor
Other
Manuf/OEM/ODM	Foxconn
Retail
FCC approval date	24 July 2013
Physical
Dimensions	420 mm x 420 mm x 289 mm
Weight	1.795 kg
Radio 1
Chip1	Brand? Model?
Wireless interface OUI	none specified
Antenna Connector Type	none specified
MIMO status	2x2:2
Wireless Standard	IEEE 802.11b/g/n
802.11n	up to 300 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz
Ubiquiti Networks PowerBeam M2-400	SWX-NBM2HP

For a list of all currently documented Ubiquiti Networks device with specifications, see Ubiquiti Networks.

• 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class

Overview

"U78Z034" and "REV.0 GP" (??) appears to be silkscreened on the SoC side of the board in the FCC photos.

The Ubiquiti Networks, "HannStar J", "94V-0 E89382", and some other stuff is silkscreened on the Ethernet port side of the board.

Additional specifications, per the FCC manual / spec. sheet, follow..