Ubiquiti Networks TOUGHSwitch PoE

From TechInfoDepot
Jump to navigationJump to search
TOUGHSwitch PoE
WikiDevi.wi-cat.ru Ubiquiti Networks TOUGHSwitch PoE
3rd Party Firmware
dd-wrt Status Unknown
OpenWrt Supported
Tomato any flavor Incompatible
Platform
Brand • Model • Rev Ubiquiti Networks TS-5-POE
CPU1 checkY Atheros AR7240
CPU1 Type MIPS 24Kc
CPU1 Speed 400 MHz
Flash1 Size 8 MiB 8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br />
RAM1 Size 64 MiB 67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br />
ETH chip1 Atheros AR7240
Switch Atheros AR8327
Ethernet Port Count 5-1GbE
Ethernet connector 8P8C
Wired Standard IEEE 802.3i/3u/3ab
Auto-MDIX supported
Jumbo frame yes
Switch Class managed

Ethernet OUI: none specified

Expansion IF types USB 2.0
Stock bootloader U-Boot
Power 24 VDC, 2.5 A
Connector type barrel
Serial Port (UART) yes, 3.3V TTL, (115200 8N1)
Other

Default IP address: 192.168.1.20
the IP 192.168.1.20 is used by 11 additional devices
of which 9 are Ubiquiti Networks devices
Default login user: ubnt
Default login password: ubnt
ubnt:ubnt credentials used by 30 additional devices
of which 30 are Ubiquiti Networks devices

Flags:
PoE Switch
Retail
UPC 799632084358
(UPC DB, On eBay)
ASIN B00HXT8QKC
Country of manuf China

For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.

For a list of all currently documented Ubiquiti Networks devices with specifications, see Ubiquiti Networks.

Overview

Additional specifications, per UBNT's QSG

  • Management port: 1x 10/100 Ethernet
  • PoE capabilities: Off/24V over all switched ports
  • Weight: 250 g
  • Dimensions: 197 mm x 87.5 mm x 27.3 mm

Links of Interest

Quick Start Guide

Flashing

Flashing OpenWrt

Target: ath79
Subtarget: generic
Package architecture: mips_24kc
Supported Since Commit
Support started version: 21.02.0
Current supported version: 25.12.0
LAN Hardware: Atheros AR8327
LAN Comment: 24V Passive PoE on 5 Gigabit Ports
Installation method(s):
see git-commit
Recovery method(s):
see git-commit
git • >>
ath79: add support for Ubiquiti EdgeSwitch/ToughSwitch 5XP
The Ubiquiti ToughSwitch 5XP is a 5-port PoE Gigabit switch with a single
Fast-Ethernet management port. It supports both 24V passive PoE out on all
five ports.

Flash:    8 MB
RAM:      64 MB
SoC:      AR7242
Switch:   ar8327
USB:      1x USB 2.0
Ethernet: 5x GbE, 1x FE

Installation of the firmware is possible either via serial + tftpboot or
the factory firmware update function via webinterface.

By default the single Fast-Ethernet port labeled "MGMT" is configured
as the WAN port. Thus access to the device is only possible via the
five switch ports.

Serial: 3v3 115200 8n1

The serial header is located in the lower left corner of the switches PCB:

```
|
|
|
| o
| o RX
| o TX
| o GND
|
|
++  +-++-+  ++  ++  +
+--+ ++ +--++--++--+
```