UniElec U7621-06 256M/16M
From TechInfoDepot
Jump to navigationJump to search
| MTK Network Process Platform | |||||||||||||||||
|
| |||||||||||||||||
| Homepage | Product page | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| WikiDevi.wi-cat.ru | UniElec U7621-06 | ||||||||||||||||
| 3rd Party Firmware | |||||||||||||||||
| dd-wrt | Status Unknown | ||||||||||||||||
| OpenWrt | Supported | ||||||||||||||||
| Tomato any flavor | Incompatible | ||||||||||||||||
| Gargoyle | Status Unknown | ||||||||||||||||
| Platform | |||||||||||||||||
| Brand • Model • Rev | UniElec U7621-06 256M/16M | ||||||||||||||||
| Type | wireless embedded board | ||||||||||||||||
| CPU1 | MediaTek MT7621A | ||||||||||||||||
| CPU1 Type | MIPS 1004Kc | ||||||||||||||||
| CPU1 Speed | 880 MHz ( 2 cores ) 16-bit | ||||||||||||||||
| Flash1 Chip | Macronix MX25L12805D | ||||||||||||||||
| Flash1 Size | 16 MiB 16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> | ||||||||||||||||
| RAM1 Size | 256 MiB 268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> (DDR3) | ||||||||||||||||
| RAM1 Chip | Brand? Model? | ||||||||||||||||
| ETH chip1 | MediaTek MT7621A | ||||||||||||||||
| Switch | MediaTek MT7621A | ||||||||||||||||
| Ethernet Port Count |
1-1GbE-WAN 4-1GbE-LAN | ||||||||||||||||
| Wired Standard | IEEE 802.3/3u/3ab | ||||||||||||||||
|
Ethernet OUI: 7C:3E:9D | |||||||||||||||||
| Stock bootloader | U-Boot v4.0 Breed | ||||||||||||||||
| Stock FW OS | Linux 3.14.48 PandoraBox v14 | ||||||||||||||||
| Expansion IF types | Mini PCIe, USB 3.0, SATA 3.0, mSATA, SIM Card slot, TF Card slot | ||||||||||||||||
| SIM Card slot | 1 | ||||||||||||||||
| Mini PCIe slots | 3 | ||||||||||||||||
| USB ports | 1 | ||||||||||||||||
| SD/MMC Slots | 1 | ||||||||||||||||
| SATA Ports | 1 | ||||||||||||||||
| USB Hub Compatible | Untested | ||||||||||||||||
| Power | 12 VDC, 1 A | ||||||||||||||||
| Connector type | barrel | ||||||||||||||||
| Serial Port (UART) | yes, 4-pin header, 3.3V TTL, (115200 8N1) | ||||||||||||||||
|
Flags: | |||||||||||||||||
|
| |||||||||||||||||
| Other | |||||||||||||||||
|
| |||||||||||||||||
| 3rd Party Firmware Support |
OpenWrt • (List | Dev | DLs) , PandoraBox , Padavan (unofficially) | ||||||||||||||||
| Retail | |||||||||||||||||
| (Est.) release date | October 2017 | ||||||||||||||||
| (Est.) initial retail price (in USD): | $42 | ||||||||||||||||
| |||||||||||||||||
For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.
For a list of all currently documented UniElec devices with specifications, see UniElec.
Links of Interest
- Notes use of Breed bootloader
- 2x Mini PCIe, 1x Mini PCIe/mSATA (USB 2.0), 1x SATA 3.0, 1x USB 3.0 ports
- Notes RAM as variable (256 MiB standard, 512 MiB upgraded)
- States OpenWrt, Padavan, and PandoraBox support, though, possibly unofficial?
- The price of the unit ranged from 41.90 (bare) to 124.80 USD (enclosed with MT7615 modules)
- MAC address duplication - 7c:3e:9d:1d:7a:2c
- On 4pda forums (bootlog)
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
Target: ramips
Subtarget: mt7621
Package architecture: mipsel_24kc
Supported Since Commit
Support started version: 18.06.0
Current supported version: 25.12.2
Subtarget: mt7621
Package architecture: mipsel_24kc
Supported Since Commit
Support started version: 18.06.0
Current supported version: 25.12.2
LAN Hardware: MediaTek MT7621AT
WLAN Hardware: WLAN dependent on mPCIe installed
WLAN Comment: 4 detachable antennas, WLAN dependent on mPCIe installed
Installation method(s):
See git-commit
Recovery method(s):
Breed web recovery, see git-commit
Comment:
The manufacturer offers five different wireless cards with MediaTek chipsets, based on MT76x2, MT7603 and MT7615. Images of the board all show that the miniPCIe slots are dedicated to specific Wi-Fi cards. However, the slots are generic.
WLAN Hardware: WLAN dependent on mPCIe installed
WLAN Comment: 4 detachable antennas, WLAN dependent on mPCIe installed
Installation method(s):
See git-commit
Recovery method(s):
Breed web recovery, see git-commit
Comment:
The manufacturer offers five different wireless cards with MediaTek chipsets, based on MT76x2, MT7603 and MT7615. Images of the board all show that the miniPCIe slots are dedicated to specific Wi-Fi cards. However, the slots are generic.
| git • >> |
|---|
ramips: add support for UniElec U7621-06 UniElec U7621-06 is a router platform board based on MediaTek MT7621AT. The device has the following specifications: - MT7621AT (880 MHz) - 256/512 MB of RAM (DDR3) - 8/16/32/64 MB of FLASH (SPI NOR) - 5x 1 Gbps Ethernet (MT7621 built-in switch) - 1x ASMedia ASM1061 (for mSATA and SATA) - 2x miniPCIe slots (PCIe bus only) - 1x mSATA slot (with USB 2.0 bus for modem) - 1x SATA - 1x miniSIM slot - 1x microSD slot - 1x USB 3.0 - 12x LEDs (3 GPIO-controlled) - 1x reset button - 1x UART header (4-pins) - 1x GPIO header (30-pins) - 1x FPC connector for LEDs (20-pin, 0.5 mm pitch) - 1x DC jack for main power (12 V) The following has been tested and is working: - Ethernet switch - miniPCIe slots (tested with Wi-Fi cards) - mSATA slot (tested with modem and mSATA drive) - miniSIM slot - sysupgrade - reset button - microSD slot Installation: This board might come with a different firmware versions (MediaTek SDK, PandoraBox, Padavan, etc.). If your board comes with PandoraBox, you can install LEDE using sysupgrade. Just SSH to the router and perform forced sysupgrade (due to a board name mismatch). The default IP of this board should be: 192.168.1.1 and username/password: root/admin. In case of a different firmware, you can use web based recovery described below. Use the following command to perform the sysupgrade (for the 256MB RAM/16MB flash version): sysupgrade -n -F lede-ramips-mt7621-u7621-06-256M-16M-squashfs-sysupgrade.bin Recovery: This board contains a Chinese, closed-source bootloader called Breed (Boot and Recovery Environment for Embedded Devices). Breed supports web recovery and to enter it, you keep the reset button pressed for around 5 seconds during boot. Your machine will be assigned an IP through DHCP and the router will use IP address 192.168.1.1. The recovery website is in Chinese, but is easy to use. Click on the second item in the list to access the recovery page, then the second item on the next page is where you select the firmware. In order to start the recovery, you click the button at the bottom. LEDs list (top row, left to right): - LED_WWAN# (connected with pin 42 in LTE/mSATA slot) - Power (connected directly to 3V3) - CTS2_N (GPIO10, configured as "status" LED) - TXD2 (GPIO11, configured as "led4", without default trigger) - RXD2 (GPIO12, configured as "led5", without default trigger) - LED_WLAN# (connected with pin 44 in wifi0 slot) LEDs list (bottom row, left to right): - ESW_P0_LED_0 - ESW_P1_LED_0 - ESW_P2_LED_0 - ESW_P3_LED_0 - ESW_P4_LED_0 - LED_WLAN# (connected with pin 44 in wifi1 slot) Other notes: 1. The board is available with different amounts of RAM and flash. We have only added support for the 256/16 MB configuration, as that seems to be the default. However, all the required infrastructure is in place for making support for the other configurations easy. 2. The manufacturer offers five different wireless cards with MediaTek chipsets, based on MT76x2, MT7603 and MT7615. Images of the board all show that the miniPCIe slots are dedicated to specific Wi-Fi cards. However, the slots are generic. 3. All boards we got access to had the same EEPROM content. The default firmware reads the Ethernet MAC from offset 0xe000 in factory partition. This offset only contains 0xffs, so a random MAC will be generated on every boot of the router. There is a valid MAC stored at offset 0xe006 and this MAC is shown as the WAN MAC in the bootloader. However, it is the same on all boards we have checked. Based on information provided by the vendor, all boards sold in small quantities are considered more as samples for development purposes. |
Pictures
See also
- UniElec U350P-18 • AX3000 Dual Band Gigabit Wi-Fi 6 Router • PPage
- UniElec U5018-01 • AX3000 Dual Band Gigabit Wi-Fi 6 Router • PPage
- UniElec U7620N-01 • PPage
- UniElec U7621-01 • AC1200 Wireless Dual Band Gigabit Router w/ Sim 4G Module • PPage
- UniElec U7621-01-AX • AX1800 Dual Band Gigabit Wi-Fi 6 Router w/ Sim 4G/5G Module • PPage
- UniElec U7621-02 • PPage
- UniElec U7621-02-AX • Dual Sim Dual 4G/5G Module Wi-Fi 6 Router • PPage
- UniElec U7621-06 • Dual Band Gigabit Wi-Fi Router with Sim 4G Module • PPage
- UniElec U7622-02 • Dual Sim Dual 4G/5G Module Wi-Fi Router • PPage
- UniElec U7623-02 • PPage
- UniElec U7628-01 • PPage
- UniElec U7628-02 • PPage
- UniElec U7981-01-AX • AX3000 Dual Band Gigabit Wi-Fi 6 Router • PPage
- UniElec U7986-06 • AX6000 Wi-Fi 6 Router with a 2.5G port • PPage
- MediaTek MT7986A/MT7975N/MT7975PN/MT7531AE/MxL GPY211
- UniElec U8071-01 • AX3000 Dual Band Gigabit Wi-Fi 6 Router with two 10G SFP ports • PPage
- UniElec U8071-20 • AX3000 Dual Band Gigabit Wi-Fi 6 Router w/ Sim 5G/4G Module • PPage
- UniElec U8072-01 • AX3600 Dual Band Gigabit Wi-Fi 6 Router with two 10G SFP ports • PPage