Valemount WAR1-CPE
From TechInfoDepot
Jump to navigationJump to search
single-board computer | |
InfoDepot Wiki | Valemount WAR1-CPE |
---|---|
3rd Party Firmware | |
dd-wrt | Activation Required |
OpenWrt | Incompatible |
Tomato any flavor | Incompatible |
Gargoyle | Status Unknown |
Platform | |
Brand • Model • Rev | Valemount WAR1-CPE |
Type | single-board computer |
CPU1 ![]() | Infineon ADM5120 |
CPU1 Type | MIPS 4Kc (Little Endian) |
CPU1 Speed | 175 MHz |
Flash1 Chip | Brand? Model? |
Flash1 Size | 4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> |
RAM1 Size | 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> |
RAM1 Chip | Brand? Model? |
ETH chip1 | Brand? Model? |
Ethernet Port Count | 2-LAN |
| |
Expansion IF types | Mini PCI |
Mini PCI slots | 1 |
PoE | 802.3af, standard |
Power | 12-24 VDC, ? A |
Serial Port (UART) | yes |
JTAG Port | yes |
| |
| |
Other | |
| |
3rd Party Firmware Support |
DD-WRT • (List) |
For a list of all currently documented Infineon (Lantiq) chipsets with specifications, see Infineon.
For a list of all currently documented Valemount devices with specifications, see Valemount.
Flashing
![]() | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing dd-wrt
![]() | DD-WRT Activation Required. |
Supported by dd-wrt as of = WP54 v.24SP2 - build 11165
- CPX WP54-6E based
- myloader must be installed
Please insert instructions here