Verizon One
From TechInfoDepot
				
				
				Jump to navigationJump to search
				
				| bg (G54) | |
|---|---|
| US DECT BASE UNIT | |
| 3rd Party Firmware | |
| dd-wrt | Status Unknown | 
| OpenWrt | Status Unknown | 
| Tomato any flavor | Incompatible | 
| Platform | |
| Brand • Model • Rev | Verizon One VZ1 | 
| FCC ID | VGBW4BOP2207015 | 
| IC ID | 619A-A90VZ10X | 
| US ID | 5KPDL01AA90VZ10XX | 
| Type | VoIP handset base station, analog phone gateway | 
| CPU1  | Freescale i.MX31C | 
| CPU1 Type | ARM11 | 
| CPU1 Speed | not specified | 
| CPU2  | Analog Devices ADSP-BF536 | 
| Flash1 Chip | Brand? Model? | 
| Flash1 Size | 8 MiB 8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> | 
| RAM1 Size | 64 MiB 67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> | 
| RAM1 Chip | Samsung Model? | 
| ETH chip1 | Freescale i.MX31C | 
| Ethernet Port Count | 1-100MbE-LAN | 
| Wired Standard | IEEE 802.3i/3u | 
| 802dot11 OUI: none specified | |
| Expansion IF types | USB 2.0 | 
| USB ports | 2 | 
| USB Hub Compatible | Untested | 
| Power | 5 VDC, 5 A | 
| Connector type | barrel | 
| Flags: | |
|  | |
| Other | |
|  | |
| Manuf/OEM/ODM | OpenPeak OP2207015 | 
| Retail | |
| FCC approval date | 10 September 2007 | 
| Country of manuf | China | 
| Radio 1 | |
| Chip1 | Ralink Model? | 
| Wireless interface OUI | none specified | 
| Antenna Connector Type | none specified | 
| Wireless Standard | IEEE 802.11b/g | 
| 802.11g | up to 54 Mbps | 
| 802.11b | up to 11 Mbps | 
| WiFi Operating Frequency | 2.4 GHz | 
For a list of all currently documented Analog Devices (Ikanos) SoC's with specifications, see Analog Devices.
For a list of all currently documented Freescale (NXP) SoC's with specifications, see Freescale.
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
For a list of all currently documented Verizon devices with specifications, see Verizon.
- • 54 Mbps - 2.4GHz 802.11g = G54 class
Overview
- VZ1 Handset (OpenPeak Inc.)
- This was targeted for FiOS use at one point..
- but it is unknown if it was even rolled out
This device is using a Winbond W93560DG DECT baseband chip.
It appears to be using a Murata / Sychip (or some other vendor) WiFi module.
- The power adapter shown in the FCC photos is a Ktec KSAH0500500T1M3
- 100-240VAC ~ 50/60Hz, 1.2A -> 5VDC, 5.0A
Categories: 
- Verizon
- Embedded system/VoIP handset base station
- Embedded system/analog phone gateway
- Embedded System Freescale
- Embedded System i.MX31C
- Freescale
- Embedded System ARM11
- Embedded System
- Embedded System Analog Devices
- Embedded System ADSP-BF536
- Analog Devices
- Manuf OpenPeak
- Embedded System Ralink
- Ralink
- Embedded System IEEE 802.11b/g
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- Single-Band
- English Documentation



