WAVLINK WL-WN530HG4

From TechInfoDepot
Jump to navigationJump to search
abgn+ac (AC1200)
AC1200 High Power Dual Band Wireless Router
Homepage Product page
3rd Party Firmware
dd-wrt Status Unknown
OpenWrt Supported
Tomato any flavor Incompatible
Gargoyle Status Unknown
Platform
Brand • Model • Rev WAVLINK WL-WN530H4
FCC ID none specified
Type wireless router
CPU1 checkY MediaTek MT7620A
CPU1 Type MIPS 24KEc
CPU1 Speed 580 MHz 32-bit
Flash1 Chip Brand? Model?
Flash1 Size 8 MiB 8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br />
RAM1 Size 64 MiB 67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br />
RAM1 Chip Brand? Model?
ETH chip1 MediaTek MT7620A
ETH chip2 Realtek RTL8211F
Switch MediaTek MT7620A
Ethernet Port Count 1-1GbE-WAN
4-100MbE-LAN
Wired Standard IEEE 802.3i/3u/3ab

802dot11 OUI: none specified

Stock bootloader U-Boot
Expansion IF types none specified
Power 12 VDC, 1.5 A
Connector type barrel
Serial Port (UART) yes, 3.3V TTL, (57600 8N1)
Other

Default IP address: 192.168.10.1
the IP 192.168.10.1 is used by 136 additional devices
of which 2 are WAVLINK devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1358 additional devices
of which 2 are WAVLINK devices

3rd Party Firmware Support OpenWrt • (List | Dev | DLs)
Retail
Newegg 9SIA6PF9M20192
Radio 1
Chip1 MediaTek MT7620A
Wireless interface OUI none specified
Antenna Connector Type none specified
MIMO status 2x2:2
Wireless Standard IEEE 802.11b/g/n
802.11n up to 300 Mbps
802.11g up to 54 Mbps
802.11b up to 11 Mbps
WiFi Operating Frequency 2.4 GHz
Radio 2
Chip1 MediaTek MT7612E
Wireless interface OUI none specified
Antenna Connector Type none specified
MIMO status 2x2:2
Wireless Standard IEEE 802.11a/n/ac
802.11ac up to 867 Mbps
802.11n up to 300 Mbps
802.11a up to 54 Mbps
WiFi Operating Frequency 5 GHz

For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.
For a list of all currently documented Realtek chipsets with specifications, see Realtek.

For a list of all currently documented WAVLINK devices with specifications, see WAVLINK.

• 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.),
• 867 Mbps - 2SS 5GHz 802.11ac (80MHz chan.) = AC1200 class

Flashing

Flashing OpenWrt

Target: ramips
Subtarget: mt7620
Package architecture: mipsel_24kc
Supported Since Commit
Support started version: 21.02.0
Current supported version: 25.12.2
LAN Hardware: MediaTek MT7620A
LAN Comment: Realtek RTL8211F Phy for GbE
WLAN Hardware: MediaTek MT7620A, MediaTek MT7612E
Installation method(s):
GUI OEM, see git-commit
Install Comment:
Rename initramfs image to WN530HG4-WAVLINK before installation. Use sysupgrade afterwards for permanent installation.
git • >> 
ramips: add support for Wavlink WL-WN530HG4
Same hardware as Phicomm K2G but different flash layout.

Specification:
- SoC: MediaTek MT7620A
- Flash: 8 MB
- RAM: 64 MB
- Ethernet: 4 FE ports and 1 GE port (RTL8211F on port 5)
- Wireless radio: MT7620 for 2.4G and MT7612E for 5G, both equipped
  with external PA.
- UART: 1 x UART on PCB - 57600 8N1

Flash instruction:
To avoid requiring UART for TFTP a dual flash procedure is suggested
to install the squashfs image:
1. Rename openwrt-ramips-mt7620-wavlink_wl-wn530hg4-initramfs-kernel.bin
   to WN530HG4-WAVLINK.
2. Flash this file with the factory web interface.
3. With OpenWRT now running use standard sysupgrade to install the
   squashfs image.

Signed-off-by: Nuno Goncalves
[remove dts-v1, remove model from LED labels, wrap commit message]
Signed-off-by: Adrian Schmutzler
Retrieved from "https://techinfodepot.shoutwiki.com/w/index.php?title=WAVLINK_WL-WN530HG4&oldid=539448"