WAVLINK WL-WNT100X3 ubootmod

multiple revisions of this device, use caution

abgn+ac+ax (AX3000)
AX3000 Wi-Fi 6 VPN Travel Router
Homepage	Product page
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Supported
Tomato any flavor	Incompatible
Gargoyle	Status Unknown
Platform
Brand • Model • Rev	WAVLINK WL-WNT100X3 ubootmod
FCC ID	none specified
Type	travel router
CPU1 Y	MediaTek MT7981B
CPU1 Type	ARM Cortex-A53
CPU1 Speed	1.3 GHz ( 2 cores ) 64-bit
Flash1 Chip	ESMT F50L1G41LB
Flash1 Size	128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (SPI NAND)
RAM1 Size	512 MiB536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> (DDR3)
RAM1 Chip	Brand? Model?
ETH chip1	MediaTek MT7981B
Ethernet Port Count	2-1GbE-LAN
Wired Standard	IEEE 802.3i/3u/3ab
802dot11 OUI: none specified
Stock bootloader	U-Boot
Expansion IF types	USB 3.0
USB ports	1
USB Hub Compatible	Untested
Power	5 VDC, 3 A
Connector type	USB Type C
Other
3rd Party Firmware Support	OpenWrt • (List | Dev | DLs)
Radio 1
Chip1	MediaTek MT7981B
Wireless interface OUI	none specified
Antenna Connector Type	none specified
MIMO status	2x2:2
Wireless Standard	IEEE 802.11b/g/n/ax
802.11ax	up to 574 Mbps
802.11n	up to 300 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz
Radio 2
Chip1	MediaTek MT7981B
Wireless interface OUI	none specified
Antenna Connector Type	none specified
MIMO status	3x3:2
Wireless Standard	IEEE 802.11a/n/ac/ax
802.11ax	up to 1201 Mbps
802.11ac	up to 867 Mbps
802.11n	up to 300 Mbps
802.11a	up to 54 Mbps
WiFi Operating Frequency	5 GHz
CPU1 brand Radio1 chip1 brand Radio2 chip1 brand WAVLINK WL-WNT100X3 MediaTek MediaTek MediaTek WAVLINK WL-WNT100X3 ubootmod MediaTek MediaTek MediaTek

For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.

For a list of all currently documented WAVLINK devices with specifications, see WAVLINK.

• 574 Mbps - 2SS 2.4GHz 802.11ax (40MHz chan., 1024QAM),

• 2402 Mbps - 2SS 5GHz 802.11ax (160MHz chan., 1024QAM) = AX3000 class

Flashing

Flashing OpenWrt

On the OpenWrt ToH (techdata entry)

Target: mediatek
Subtarget: filogic
Package architecture: aarch64_cortex-a53
Supported Since Commit
Support started version: unknown
Current supported version: snapshot

WLAN Hardware: MediaTek MT7981
WLAN Comment: 2x2 DBDC
USB SATA Comment: USB 3.0 type A port, 1x USB-C power
Installation method(s):
see git-commit
Recovery method(s):
see git-commit

git • >>

mediatek: add support for Wavlink WL-WNT100X3 ubootmod This allows us to use the full size of nand, which increases ubi size from 90M to 122.25M. Flashing instructions: 1. Login into the device and backup all your partitions, especially `Factory` and 'HW' to be able to come back to stock and use all Wavlink services. 2. Unlock mtd partitions: ``` apk update && apk add kmod-mtd-rw insmod mtd-rw i_want_a_brick=1 ``` 3. Upload new `bl2` and `fip` to the router /tmp and write them: ``` mtd write /tmp/openwrt-mediatek-filogic-wavlink_wl-wnt100x3-ubootmod-preloader.bin bl2 mtd write /tmp/openwrt-mediatek-filogic-wavlink_wl-wnt100x3-ubootmod-bl31-uboot.fip fip mtd erase ubi ``` 4. Set static IP on your PC: IP 192.168.1.254/24, GW 192.168.1.1 5. Serve OpenWrt initramfs image using TFTP server. 6. Cut off the power and re-engage, wait for TFTP recovery to complete. 7. After OpenWrt initramfs has booted, prepare ubi and envs: ``` ubidetach -p /dev/mtd4 && ubiformat /dev/mtd4 -y && ubiattach -p /dev/mtd4 && ubimkvol /dev/ubi0 -n 0 -N ubootenv -s 128KiB && ubimkvol /dev/ubi0 -n 1 -N ubootenv2 -s 128KiB ``` 8. Perform sysupgrade. Signed-off-by: Fil Dunsky Link: https://github.com/openwrt/openwrt/pull/22753 Signed-off-by: Hauke Mehrtens